Details

About Eastwood 1/2 inch Impact Wrench with Metric and SAE Sockets

Eastwood 1/2 Inch Twin Hammer Composite Air Impact Wrench
Twin-hammer mechanism inside Eastwood's 1/2 Inch Drive Air Impact Wrench helps generate more power and smooth, balanced blows...composite body makes it lightweight (less than 5 lbs). Pneumatic impact wrench with twin-hammer mechanism delivers up to 420 ft.-lbs. of torque to help you drive and remove the most stubborn fasteners with just a squeeze of the trigger. The variable-speed trigger has 6-step adjustable torque control. Uses 5 cfm at 90 psi, so it works with your home compressor.

Eastwood Impact Socket Set
Do the Job Right with Eastwood's high quality impact sockets. All of our impact sockets feature off-corner loading to reduce fastener rounding by increasing the surface area at the points of contact, alleviating stress on fastener corners. Forged from durable chrome molybdenum steel for strength, our sockets are coated with black oxide for corrosion resistance. Comes with a socket rail.

Eastwood Aerosol Injected Lubricator 11 oz Net
Eastwood's award-winning Aerosol-Injected Lubricant System directs a focused blast of lubricant to penetrate deep into hard-to-reach places. Our Aerosol-Injected Lubricant System was the 2011 Winner of Popular Mechanic's Magazine Editor's Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can's nozzle that creates a tight seal to force the lubricant deep into the tool or tubing, without blowback. Not just for your air tools, you can use our Lubricant on speedometer cables, locks and mechanisms, machinery and shop equipment, and also use for fogging/engine storage.

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

13741 Eastwood 1/2 Inch Twin Hammer Composite Air Impact Wrench

70221 Eastwood 1/2 Inch Drive 12 Piece Metric Impact Socket Set
Includes 1/2 Inch Drive Standard 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm Impact Sockets

70219 Eastwood SAE 1/2 Inch Drive 11 Piece Impact Socket Set

70223 Eastwood 1/2 Inch Drive 4 Piece Impact Accessory Set
Includes 1/2 Inch Drive 3 Inch Extension, 6 Inch Extension, 10 Inch Extension, U-Joint

13445 Z Eastwood Aerosol Injected Lubricator

Eastwood 1/2 Inch Twin Hammer Composite Air Impact Wrench
Always wear appropriate eye protection. Do not exceed 90 psi. Hold tool securely (2-handed operation is recommended). Keep loose clothing, jewelry and long hair away from rotating components. Use only with specific "impact-rated" sockets, adapters and accessories. Always make sure the work piece is securely clamped or anchored. Always disconnect tool from air supply when changing sockets or accessories.

Eastwood Aerosol Injected Lubricator
POINT LUBRICANT AWAY FROM FACE! Always wear eye, skin and respiratory protection when using these products. Use in a well-ventilated area away from open flame. VOC content: MCP Maximum 1.90.

Eastwood 1/2 Inch Twin Hammer Composite Air Impact Wrench
One year warranty against manufacturer's defects.

Eastwood Sockets
Lifetime warranty against manufacturer's defects.

Click here for Eastwood 1/2 Inch Twin Hammer Composite Air Impact Wrench instructions

Eastwood Aerosol Injected Lubricator
1. Test-fit the injector tip into area to be lubricated. Make sure it fits snugly into place.
2. Put on eye protection and point nozzle away from your face.
3. Insert nozzle tip into orifice and gently push the can to deliver the lubricant. If fogging an engine, remove spark plugs and insert tip into cylinder and apply lubricant. Replace spark plugs when complete. Always store with the extension tube removed to prevent accidental discharge.