• Home
  • 1/4" Mini Air Die Grinder
1/4" Mini Air Die Grinder is rated 4.3 out of 5 by 7.
Rated 4 out of 5 by from Great value I purchasd this to polish and port steel heads and aluminum intake. It worked flawlessly. Plenty of power and speed to do the job. The reason for the less than perfect rating is the sound. This tool is very loud so you will need to wear ear plugs. I didn't and my ears rang for a week. I purchased a Chicago grinder that was half the db volume....but it was 3 times the price and and didn't perform any better.
Date published: 2014-10-19
Rated 5 out of 5 by from Just plain works. Inexpensive, a 2nd-grinder to my older right-angle grinder. Just plain worked, did exactly what I hoped-for, and I everything I needed (except teflon-tape) was in the box to hook-up and use. Good speed, strong-enough to overcome some heavy loading.
Date published: 2013-11-08
Rated 5 out of 5 by from price is right I received the product, oiled it up, which you must do DAILEY, and went to work. I believe this product will give long service provided you oil it everyday!!!!
Date published: 2013-12-11
  • y_2017, m_4, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_13736, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

1/4" Mini Air Die Grinder

Item #13736 Brand: Eastwood

Small but powerful, for grinding,
porting, smoothing, polishing, etc.

In stock

Only $19.99


Eastwood 1/4" Mini Air Die Grinder won't stall out on the tough jobs It's got the power and RPMs to get you through your high-speed grinding, porting, smoothing, polishing and deburring tasks.
  • 25,000-rpm no-load speed
  • Built-in regulator controls speed
  • Long-life ball-bearing construction
  • Needs only 3.3 cfm at 90 psi
  • Lightweight for less fatigue

More info...

About 1/4" Mini Air Die Grinder

Compare our 1/4" Mini Air Die Grinder to the more expensive brands and you'll come to the same conclusion we did: ours is just as good, and an even better value! Features ball-bearing construction for long life, self-locking lever throttle, rear exhaust, and ergonomic grip. Stall-resistant design, with hardened gears and heat-treated components for durability and reliability. 1/4" FNPT air inlet. Final product imported.


1/4" Mini Air Die Grinder
2 Collet Wrenches


Click here for product instructions


Do not exceed 90 psi (6.3 bar) of tool inlet air pressure. Do not force tool or exert side forces on bit while grinding or cutting. Wear approved eye gear at all times when operating this tool. Keep loose clothing, jewelry and long hair away from rotating components. Always make sure the workpiece being ground or cut is securely clamped. Wear appropriate respiratory protection. Always disconnect tool from air supply when changing bits.


One year warranty against manufacturer's defects.

Final product imported.

Customer Reviews

Questions & Answers

Customers also viewed: