• Home
  • 1in X 72 yd High Temp Masking Tape
1" X 72' High Temp Masking Tape is rated 4.470588235294118 out of 5 by 17.
Rated 5 out of 5 by from Worked Great I bought 2 roles of different sizes. I have had a ton of part powedercoated. Motorcycle engine parts, covers, frame and suspension parts. The tape worked great. Just as good as the tape the powdercoater uses. I mask my own stuff after I media blast it so I ensure the powder coat does not get where I want. Many of the parts I have had coated were very detailed. The main thing with this tape is to burnish it down with your finger nail to have sure it is on the surface well. It cuts nice with a razor blade as well.
Date published: 2014-12-02
Rated 5 out of 5 by from A killer combo when added with the High-temp plugs I honestly had my doubts about how well this tape would hold up and mask off areas from the powder coat. But i was proven wrong. This tape did exactly what it says. It's easy to apply, it withstands the heat without coming off, and after the curing process it's easily removed with NO leftover adhesive on the unit. AMAZING combo with the High-temp plugs!!
Date published: 2010-06-21
Rated 2 out of 5 by from Disappointed I bought this some time ago and finally used it tonight to pin strip some parts and mask off a large area. It shrank badly and the small pin strip tape would not peel off after the part was cured. I soaked it in solvent and I could finally scrape it off with my fingernail but the edges were not sharp at all. Maybe it was on my shelf too long but I won't use it again.
Date published: 2014-01-24
Rated 4 out of 5 by from Not stable once heated... I bought this as a cheep alternative to the fiberglass tape. It works good for masking cold but as I found out while doing a two tone job, it shrivels up once preheated (even with the dual voltage gun, multiple coats sometimes need preheated). In my opinion, only good for initial masking while cold, I wouldn't expect it to "hold a line" once heated. (5 stars for cold use & 0 stars for hot use).
Date published: 2013-10-24
Rated 4 out of 5 by from Worked well under the circumstances I used the tape to "mask off" a knife blade that I was soldering a hilt onto. Unfortunately, I got the blade a good bit hotter than the recommended 500 degrees for the tape. The tape disintegrated about an inch up from the hilt but the rest of the blade (5") was not scorched as it would have been w/o the tape.
Date published: 2014-12-03
Rated 4 out of 5 by from Like the 500 deg.rating! My favorite high temp making tape, but we need a 3" wide roll. 2" wide tape won't mask an intake to head gasket surface in one pass! It will still shrink off from concave surfaces.
Date published: 2015-02-10
Rated 5 out of 5 by from Great stuff!! I use Eastwood tape exclusively on all my parts that require masking. It has always worked well with no slippage or peeling. And the free shipping is like icing on the cake.
Date published: 2014-06-26
Rated 5 out of 5 by from Very Cool Product This doesn't look like masking tape but it sure works like it is supposed to. A true 5 star product.. Easy to apply and stays where you put it.
Date published: 2014-04-07
  • 2016-09-26T07:40CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_US, sid_21671, PRD, sort_relevancy
  • clientName_eastwood

1in X 72 yd High Temp Masking Tape

Item #21671

Silicone tape creates fine parting lines; removes without residue
Blue polyester tape is ideal for general powder coating applications; it is the industry standard for conformable polyesters.Removes cleanly from surfaces without leaving a residue, and is well-suited for applications such as taping off large surfaces, general purpose die cutting, PC board masking, and sharp edge masking. Maximum Temperature: 500 F.Total Thickness: 3.0 mils. Extremely Conformable.

Details

Blue polyester tape is ideal for general powder coating applications; it is the industry standard for conformable polyesters.Removes cleanly from surfaces without leaving a residue, and is well-suited for applications such as taping off large surfaces, general purpose die cutting, PC board masking, and sharp edge masking.
  • Maximum Temperature: 500 F
  • Total Thickness: 3.0 mils
  • Extremely Conformable

More info...

About 1in X 72 yd High Temp Masking Tape

Blue polyester tape is ideal for general powder coating applications; it is the industry standard for conformable polyesters.Removes cleanly from surfaces without leaving a residue, and is well-suited for applications such as taping off large surfaces, general purpose die cutting, PC board masking, and sharp edge masking. Maximum Temperature: 500 F.Total Thickness: 3.0 mils. Extremely Conformable.


Customers also viewed: