- 2K Aerospray High Build Urethane Primer Gray
2K Aerospray High Build Urethane Primer Gray
Item #14794Z Brand: Eastwood
Eastwood's 2K Aerospray High Build Urethane Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.
- 2-Component Catalyzed Technology
- Two Chamber Design Aerosol
- Most Durable Aerosol Urethane Primer Available
- Sprays Like a Paint Gun
The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.
About 2K Aerospray High Build Urethane Primer Gray
Can be applied over: Painted surfaces or epoxy-primed surfaces
Surface Preparation: Abrade surface with 320-400 grit sandpaper. Clean with PRE Paint Prep.
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.
11.8 ounces net weight
Product Info Sheets
Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings
Made in Germany
Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life 48 hours at 68 degreesF.
Questions & Answers
Customers also viewed:
Durability and precision of a 2-component coating, without the paint gun