• Home
  • 2K AeroSpray™ High Build Urethane Primer Black
2K AeroSpray™ High Build Urethane Primer Black is rated 3.1429 out of 5 by 7.
Rated 2 out of 5 by from Worst experience ever!!! Can#1 - Activated can,, shook for 4min,,The first spray on test panel came out in globs, I tried to adjust nozzle, and can would no longer spray. For the next 10min I tried to unclog nozzle,, then I tested nozzle on un-activated can, I switch the nozzle to activated can with no success, and finally rather than loose the remaining product I punctured the can and emptied the contents into a mixing cup, reduced it and sprayed it from my "Eastwood Gun". Can#2 - Activated can,, shook for 4min,, Was able to spray a 5"x10" pattern on test panel but the stream was too heavy, when I tried to adjust the nozzle, The patented " Innovative nozzle technology" Failed miserably again!!! I then punctured the can and emptied the contents into a mixing cup, reduced it and sprayed it from my "Eastwood Gun".
Date published: 2014-07-31
Rated 1 out of 5 by from Horrible! This stuff is a waste of money. I have used the 2k aero spray epoxy and clear coat with great success. Those are good products and I would recommend them. Relying on this past success with the similar products I spent $100 on 4 cans to do some small parts. Only one of the cans worked. The other three continuously spit out paint or wouldn't spray at all (especially on horizontal pieces). It just seemed the cans couldn't generate enough power to atomize the thicker primer. I even tried soaking the nozzles in reducer to no avail. The one can that did work sprayed so thin I don't think it is fair to call this high build primer. Also, there wasn't much primer in the can. I would stick to a regular 2k primer in a spray gun and avoid this. Again, the epoxy and clear are pretty good products but this stuff is junk.
Date published: 2015-02-13
Rated 5 out of 5 by from Great product Primer went on smooth with good coverage. Very happy and will use again.
Date published: 2014-03-09
Rated 5 out of 5 by from 2K AeroSpray High Build Black Urethane Primer I had an excellent experience with this product. In fact it saved me from missing some spots I missed preparing my 36 Chevy front fender for paint. I will definitly use again. I did sand this primer down before spraying gloss black. Turned out fantastic.
Date published: 2014-11-11
Rated 3 out of 5 by from Great quaility The paint lays down excellent. It's almost like it's out of a spray gun. It's an expensive product, so if you don't use up the entire can, it's wasted. Once you activate the propellent, the remainder of the paint contents only last a day.
Date published: 2014-04-09
Rated 1 out of 5 by from not worth the money prep car for hours only to have product fail:followed directions to a tee and the primer is terrible.it spit and sputtered coverage was terrible:not like they show on youtube.dont waste your money
Date published: 2014-07-06
Rated 5 out of 5 by from 2K AeroSprayHigh Build Urethane Primer Black Worked very well. Good coverage and build. I found it produces less orange peal when warmed to 90 to 95 degrees.
Date published: 2014-03-13
  • 2015-03-01T09:25CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_14793Z, PRD, sort_relevancy
  • clientName_eastwood

If I'm trying to paint a brand new plastic bumper from the factory, do I need this or can I just use sems adhesion promoter?

Asked by: knoggy
The adhesion promoter is the only thing that is necessary. Urethane Primer is only necessary if you have filler or scratches to cover.
Answered by: MikeL
Date published: 2015-01-05
  • 2015-03-01T10:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_14793Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

2K AeroSpray™ High Build Urethane Primer Black

Item #14793Z Brand: Eastwood

2K AeroSpray™ High Build Urethane Primer Black

Details

Eastwood's 2K AeroSpray High Build Urethane Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.

More info...

About 2K AeroSpray™ High Build Urethane Primer Black

Eastwood's 2K AeroSpray High Build Urethane Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.br>
Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


Contents

11.8 ounces net weight


Accessories

10041Z PRE Painting Prep. 12196Z Chassis Kleen, 14149Z 2K Epoxy Primer. 16060Z Rust Encapsulator. 51483Z Rust Converter. 12846Z Aerosol Injected Cleaner.11456 Respirator


Product Info Sheets

Click Here for product info sheets



Safety

Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Warranty

Made in Germany


Application

Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 42 hours degrees F.


Customers also viewed: