• Home
  • 2K Ceramic Chassis Black Gloss & Epoxy Primer Kit
2K Ceramic Chassis Black Gloss & Epoxy Primer Kit is rated 4.6667 out of 5 by 3.
Rated 4 out of 5 by from super strong This is a great paint. The only thing that I didn't like was that there needs to be twice as much black as there is primer. The primer is mixed 1:1 and the black is mixed 4:1. When you mix 1 Qt. of each there is almost twice as much primer as there is black. If you purchase this kit it would be a good idea to buy an extra quart of black. Its not fun to run out in the middle of the project. Also if you are using 2 quarts of black make sure that you stir both quarts of paint before you start painting because there is a lot of build up at the bottom of the can. It can take a while to stir it up. You can't beat the look and strength though.
Date published: 2009-12-13
Rated 5 out of 5 by from GREAT PRODUCT THIS IS A GREAT PRODUCT. The primer went on good smooth. The paint ther was a lot of build up in the bottom of the can. Took awhile to get stir up off the bottom. After drying time the paint is good and hard. Love it.
Date published: 2015-03-18
Rated 5 out of 5 by from Great Paint I painted a 77 Camaro sub-frame with the epoxy primer and 2K ceramic chassis paint. It went on smooth and seems to be strong. Time will tell how well it holds up. I tried to add a picture but it wouldn't upload.
Date published: 2015-01-05
  • 2015-08-03T09:50CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_50109ZP, PRD, sort_relevancy
  • clientName_eastwood

how much material would we need to do a complete frame and suspension is one kit enough?

Asked by: chuckanderson
2 quarts will cover most of all size vehicles complete frame and suspension
Answered by: SeanA
Date published: 2015-07-08

can this be applied to stainless steel without primer

Asked by: Craig C
No, epoxy primer should be used over any bare metal before applying this or any other top coat.
Answered by: MikeL
Date published: 2015-03-14


Asked by: dougy
This would work well on the areas you listed.
Answered by: NickC
Date published: 2015-01-29

can u brush it on ?

Asked by: chuckchuck
Any catalyzed material like this should be sprayed on, not brushed. Brushing it will result in uneven thickness in certain spots, which will lead to issues as the paint cures.
Answered by: MikeL
Date published: 2015-01-05


Asked by: PABLO2014
No, this material is not specifically rated for high temp use. This is like other automotive urethane materials, and as such it will be serviceable up to about 250 degrees maximum temp.
Answered by: MikeL
Date published: 2014-12-11
  • 2015-08-03T10:45CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_50109ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

2K Ceramic Chassis Black Gloss & Epoxy Primer Kit

Item #50109ZP Brand: Eastwood

Prep...prime...then paint with our toughest 2K Ceramic Chassis Black


Prep, prime and paint with this all-in-one, professional-grade, 2K Ceramic Chassis Black Gloss Kit Get the ultimate finish when you apply Eastwood's Epoxy Primer under our 2K Gloss Ceramic Chassis Black, and save money when you get everything you need in this one kit! Includes...
  • 2K Ceramic Chassis Black Gloss, Quart
  • Urethane/Ceramic Activator
  • Epoxy Primer Gray, Quart
  • Epoxy Primer Catalyst, Quart
  • PRE Painting Prep, Quart

More info...

About 2K Ceramic Chassis Black Gloss & Epoxy Primer Kit

Necessity is the mother of invention. At Eastwood, we identified a need for a super-durable chassis coating that is not only Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


includes 50429ZP ceramic Chassis Black 21854 Z Chassis Black Activator 50242 ZP Epoxy Primer gray quart 50243 ZP Epoxy Primer catalyst quart 10194ZP PRE Quart


50738 Paint gun w/3 tips 19830 3M Respirtaor 20406 Paint suit


always wear eye, skin and respiratory protection


Made in USA


Eastwood Ceramic Chassis Black is easily applied with your HVLP gun with a 1.3mm or larger nozzle. Provides complete hiding in 2 coats. Allow 10 minutes between coats. Refer to product label for more complete application directions and safety information. Can be applied directly over our 50242ZP Epoxy Primer after 60 minutes to 5 days without scuffing.

Customers also viewed: