- 2K Ceramic Chassis Black Satin Quart
2K Ceramic Chassis Black Satin Quart
About 2K Ceramic Chassis Black Satin Quart
Pack of 25 EZ Mix Colormate Cards works with the magnetic holder included with the 50339 EZ Mix Colormate Holder and 25 Cards.
One catalyzed quart of Eastwood Ceramic Chassis Black covers about 50 square feet in 2 coats.
The 21854Z Activator 8 oz. is sufficient to catalyze one quart of Eastwood Ceramic Chassis Black.
Can Eastwood Ceramic Chassis Black be applied directly over other finishes? Generally Eastwood Ceramic Chassis Black can be applied over most thoroughly cured (cannot be indented with a thumbnail) finishes. Scuff first with 320 -600 grit and test a small area before coating the entire area. If lifting occurs, remove the lifting paint, sand the surrounding area, and seal the surface by priming first with 50242ZP Epoxy Primer mixed with 50243ZP Epoxy Primer Catalyst. NOTE: Eastwood Epoxy Primer can be reduced up to 20% with 50104ZP Universal Zero VOC Urethane Reducer Qt. to use strictly as a sealer.
This product is designed for use by trained professionals. Read & understand all warnings and directions before use. Do Not Use Without Sufficient Ventilation. Users must wear an appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Do not use this product, or be exposed to spray mist/vapors if you have respiratory problems, are pregnant or nursing. Keep Out Of Reach Of Children And Pets. This System comprises multiple components. Once mixed, this system will have the hazards of all components.