• Home
  • SK Tools 3/8 Inch Drive 12 Piece Metric Impact Socket Set 4062

SK Tools 3/8 Inch Drive 12 Piece Metric Impact Socket Set 4062

Item #1068221 Brand: SK Tools

SureGrip® hex design drives the side of the hex, not the corner

Details

This SK Tools 12 Piece 3/8" Drive 6 Point Standard Metric Impact Socket Set is made in the U.S.A. and features the SK's High Visibility technology.

The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120 degrees with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
  • Corrosive resistant and laser engraved every 120 degrees
  • Nose-down design
  • SureGrip® hex design drives the side of the fastener, not the corner
  • Made in the USA
  • Lifetime Warranty

More info...

About SK Tools 3/8 Inch Drive 12 Piece Metric Impact Socket Set 4062

This SK Tools 12 Piece 3/8" Drive 6 Point Standard Metric Impact Socket Set is made in the U.S.A. and features the SK's High Visibility technology.

The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120 degrees with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.

  • Corrosive resistant and laser engraved every 120 degrees
  • Nose-down design
  • SureGrip® hex design drives the side of the fastener, not the corner
  • Made in the USA
  • Lifetime Warranty


Contents

8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Standard Sockets


Safety

Always wear appropriate eye protection and only use tools for their intended purpose.


Warranty

Lifetime warranty against manufacturer defects


Customers also viewed: