• Home
  • 3-Pack Ceramic/ Rubber Blast Nozzle 2.0MM ID
3-Pack Ceramic/ Rubber Blast Nozzle 2.0MM ID is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Ceramic Nozzels Hello there, Just recently picked up a couple of 3 packs of the ceramic nozzels. The 3.5 and 5 mm inside diamiter nozzels. Both set worked very well for my application. Overall a good product for a great value and Eastwood had it to me in no time. Will definitely buy from Eastwood again. Bill
Date published: 2011-05-08
Rated 4 out of 5 by from Great Nozzles They shoot great for the blasting I need done. I just wish they lasted longer before wallowing out and becoming too large to use.
Date published: 2015-05-16
Rated 5 out of 5 by from sand blasting 5mm works great with 60 grit of sand. Recommend having at least 2-3 pack ceramic /rubber blast nozzle.
Date published: 2015-08-16
  • y_2017, m_3, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_51556, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Is there a nozzle available that can deliver a more directed spray of media?

Asked by: autotech
We have a nozzle that goes all the way down to 2mm. We also have 2.5mm and 3mm packs of these. This would be much more directed. Here is a link; http://www.eastwood.com/3-pack-ceramic-rubber-blast-nozzle-2-0mm-id.html
Answered by: S Church
Date published: 2015-06-29

what size of blast media Grit can I used with this nozzle? 30-60 or 48-80 media grit?

Asked by: quir1960
With all of our equipment you should not run anything more aggressive than 60 grit
Answered by: SeanA
Date published: 2015-06-18
  • y_2017, m_3, d_25, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_51556, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

3-Pack Ceramic/ Rubber Blast Nozzle 2.0MM ID

Item #51556

Designed to be extremely efficient with CFM usage and extended life

Details

2.0mm ceramic/rubber nozzles are designed to be extremely efficient with cfm usage and extended life. The 2.0mm is equivalent to a 0.078 diameter nozzle and will work with compressors as small as 6 cfm.

More info...

About 3-Pack Ceramic/ Rubber Blast Nozzle 2.0MM ID

2.0mm ceramic/rubber nozzles are designed to be extremely efficient with cfm usage and extended life. The 2.0mm is equivalent to a 0.078" diameter nozzle and will work with compressors as small as 6 cfm.


Contents

3 nozzles per pack pack weighs approximately 0.1 lb Nozzle life depends on media but approximately 400 lbs


Safety

Use a properly fitted dust mask or respirator, safety glass or safety shield, heavy gloves and long pants and a long sleeve shirt to protect any exposed skin. Use our safety kit # 50097 for complete protection. Assure the dead man valve is operating properly by depressing the valve lever and releasing-assuring it closes over the nozzle under its own spring pressure. If not, do not use the dead man valve until the spring or obstruction is repaired.


Customer Reviews

Questions & Answers