• Home
  • Scotch Brite Durable Flex Hand Pad Maroon 25/pk 65659

Are these pads suitable to use for an initial smoothing after applying a high build primer? It seems it would be quicker than sanding as I am going to be laying down several coats.

Asked by: Nova
Scuff pads will not take the place of block sanding. They're meant to be supplemental to sanding during the prep process. When using a surfacing primer the point is to cut down the peel and the "build" of the primer in order to level the surface. Scuff pads will not do any cutting or leveling. They will just follow the contours of the part and even the orange peel of the primer itself. Apply 3-4 coats of primer "wet-on-wet" without allowing it to cure in between coats, then allow it to fully cure. Once the primer has cured, block sand the primer with 320 to 600 grit paper. Use the scuff pad to run over your edges, etc. to make sure you're not leaving any shiny spots, then clean and top coat.
Answered by: MikeL
Date published: 2015-01-29
  • 2015-04-01T10:07CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_15129, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Scotch Brite Durable Flex Hand Pad Maroon 25/pk 65659

Item #15129 Brand: 3M

Scotch Brite Durable Flex Hand Pads are the perfect aid for sanding jobs.


The Scotch Brite Durable Flex Hand Pad maroon pack is ideal for cleaning and fine finishing.

If you need a quality product to assist in the cleaning, preparation and finishing of automotive sanding jobs, the Scotch Brite Durable Flex Hand Pad is just the thing. These hand pads combine multiple high-performance features to give you a quick, consistent scuff that your sanding jobs require.

  • Long-lasting specially coated hand pads
  • Comes in a pack of 25 pads
  • Deep maroon color

More info...

About Scotch Brite Durable Flex Hand Pad Maroon 25/pk 65659

Scotch Brite Durable Flex Hand Pads consist of conformable flexible construction for more complete scratch in channels, grooves, tight spots and other hard-to-reach areas. Each pad is tightly graded, containing more active mineral sites for fast and consistent action. These products are durable and specially coated to resist loading and prolong pad life.


25 pads per box, each pad 4.5 inch x 9 inch


15129 maroon Scotch Brite pads, 15130 Gray Scotch Brite pads, 14149Z 2K AeroSpray Epoxy Primer, 14794Z 2K AeroSpray High Build Urethane Primer, 31160 Sanding Block Kit, 12416Z Guide Coat


Warning: exposure to dust generated from work piece or abrasive materials can cause lung and other physical injury. Wear approved respirator when using this product. use dust capture or local exhaust as stated in MSDS. Always wear eye and skin protection.

Customers also viewed: