- 3M Welding & Spark Deflection Paper 24in x 150ft
3M Welding & Spark Deflection Paper 24in x 150ft
Item #14849 Brand: 3M
3M™ developed this flame-retardant, repositionable, adhesive-backed paper to deflect welding splatter, grinder sparks, chemicals and paint overspray. Use it to protect automotive glass, painted sheet metal, automotive light fixtures, and many other vertical surfaces.
- Protects painted surfaces, glass and rubber
- Must be used on vertical surfaces only
- 24" wide, 150'-long roll; cut to size
- Repositionable; easy to install
About 3M Welding & Spark Deflection Paper 24in x 150ft
3M™ Welding and Spark Deflector Paper is for use on vertical surfaces only, not for horizontal surfaces such as roofs, deck lids, hoods or carpeting on floorboards. Not designed to prevent heat transfer from sparks or spatter that are allowed to sit in one position on the paper; these will burn through. Do not use if the surface is horizontal or has areas where sparks could catch and burn.
24" x 150' Roll of 3M™ Welding and Spark Deflector Paper
12938Z Welding Anti-Spatter
12562 Welding Blanket
12590 Welding Gloves
12762 Welding Jacket
50739 Panel-Holding Kit
12115 6-pc. Welding Clamp Set
Store at room temperature. Do not use on horizontal surfaces. Always wear proper eye, skin and respiratory protection when welding. Consult MSDS for specific warnings and precautions.
Use this Deflector Paper to deflect welding splatter, grinder sparks, chemicals and paint overspray away from automotive glass, painted sheet metal, automotive light fixtures, and many other vertical surfaces.
Install by pressing in place on the surface to be protected. If more than one sheet will be used, install from the bottom first, then continue installing new sheets above it, overlapping by at least 1". Wrinkles can provide ledges for sparks to catch on, allowing them to burn through and damage the substrate underneath. Do not allow the paper to sit for more than 1 week, to be exposed to prolonged direct sunlight, or to get wet. DO NOT APPLY TO HORIZONTAL SURFACES WHERE SPARKS CAN REST AND BURN.
Customers also viewed:
Put your welder on top, plasma cutter on the bottom, tools in the middle
Shade adjustment from #9-#13, with 3.6" x 1.7" viewing area