- Eastwood 4 Inch Reversible Air Cut Off Tool
Eastwood 4 Inch Reversible Air Cut Off Tool
you work the tool into tight areas
- Forward and reverse cutting direction
- Works with your 4" cut-off wheel (sold separately)
- 8,000 RPM
- 1/4" air inlet
- Requires 10 cfm of air at 90psi
About Eastwood 4 Inch Reversible Air Cut Off Tool
This pneumatic cut off tool is a must in any shop doing restoration projects or other metal fabrication. You'll use it for cutting patch panels, fabricating steel plate, removing damaged frame sections or simply cutting rusted bolts free. Finger-controlled knob offers "on the fly" speed adjustment that reduces wheel hop and prolongs cutting life by adjusting the speed to the type and thickness of material being cut.
One of the most important features is the reversible cutting direction. If you've ever used a grinder or cut-off tool where you could not control in which direction the sparks fly, you'll appreciate the ability here to reverse the cutting direction to send sparks away from you. No longer will you have to reposition your body and head at awkward angles to avoid spark contact—simply flip the switch and the sparks fly 180 degrees away from you, others or flammable objects.
Safety guard can rotate 45 degrees either direction. 15" long overall; weighs about 1.5 lbs. Utilizes 4" Metal Cut-Off Wheels with 5/8" center arbor hole.
Use for cutting patch panels, fabricating steel plate, removing damaged frame sections, or simply cutting rusted bolts free. Speed adjustment allows accurate and precise control during the start of the cut and eliminates "skipping" of the wheel. Finger-controlled knob offers "on the fly" speed adjustment that reduces wheel hop and prolongs cutting life by adjusting the speed to the type and thickness of the material.
(Q) What are this tool's specifications?
(A) Uses 10 cfm of air at 90 psi, and operates at a maximum of 8,000 rpm. Reversible wheel rotation allows you to control where the sparks fly. Safety guard can rotate 45 degrees in either direction to get into tight areas. Cuts approximately 1/4" above surface.
Do not use to cut fuel tanks, oil tanks or any object containing flammable liquid or gasses. Always were eye, head and hand protection when using this tool.