• Home
  • 5 Rail Socket Holder Tray 21 in
5 Rail Socket Holder Tray 21 in is rated 4.3 out of 5 by 15.
Rated 5 out of 5 by from Organizes sockets masterously. I'm not a mechanic, just a guy in his garage but if you want to get your sockets organized this is the way to go. I would recommend doing a good inventory of exactly how many sockets you will be using with this tray, you may find that two of the medium trays will possibly suit you better. (?) These days I like to stay away from stuff made in China/Taiwan but so far this passes the test. I honestly wish they would look into making a higher end version with metal socket holders, the design is so good it is worthy using higher quality materials, after all we wouldn't be buying this unless we had good, high quality sockets right?
Date published: 2016-01-17
Rated 4 out of 5 by from Nice product at a reasonable price I picked this up for around $40 on a sale to compare to the similar Craftsman single rail racks I'd been buying for $20 each. Wish I'd found this 1st. The single racks have an advantage if you take a complete set of sockets to a job, but I usually work out of the toolbox. The only negative it there is room for more socket posts on the 1/4 & 3/8" rails if you don't mind packing the sockets almost in contact w/ each other. The good news is you can purchase extra posts for a low price. A couple of my sockets were a tight fit on the posts but may have been used on an impact distorting the drive opening. The lack of enough posts to fill each rail is the only reason I didn't give this 5 starts.
Date published: 2016-06-05
Rated 1 out of 5 by from Junk bought these to organize my sockets... it says you can buy more little socket holders to customize your tray... that is bull ... you can not mover them around at all... the 1/2 inch have to stay exactly that 1/2 inch... you can not have any 3/8 on the 1/2 rail... Eastwod should have kept the base of all the little holders the same size. then you could move them around how you want them... if i get my money back for these pieces of junk then i might change my review......
Date published: 2016-10-26
  • y_2017, m_8, d_18, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_30153, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Can you buy extra socket holders of each size to add to the rails?

Asked by: Slaab
We sell replacement socket rail holders in 1/4in, 3/8in, and 1/2in.
Answered by: SWhitehurst
Date published: 2017-06-07

I work in motorcycle repair and i don't use many 1/2 drive sockets. Can i replace the 1/2 in drive with more 1/4in and 3/8 drive slots? 

Asked by: ricky c
Only the 3/8th size and 1/4 inch size are interchangeable. The 1/2 inch ones have to stay where they are.
Answered by: S Church
Date published: 2017-03-15

How tall are the rails? I have one of those 52in husky boxes and in the full length drawer its only about 3-3/4'' to 4'' tall. Wondering if my craftsman deep sockets will still fit with these rails.

Asked by: Boom
These rails are 7/8" tall.
Answered by: S Church
Date published: 2017-03-21

Are these available in the sears stores

Asked by: jdoc
These are not sold in Sears stores.
Answered by: S Church
Date published: 2016-06-24

Are all socket RAILS the same size?  To be clear, if I wanted to load the entire tray with 1/2 sockets, if I order the necessary replacement socket holders, can I remove all the 3/8 and 1/4 socket holders and fill all rails with 1/2 socket holders?

Asked by: slang
The 1/2 only fit on the back row of these trays
Answered by: KHoffnagle
Date published: 2017-03-17

Does it come with size labels?

Asked by: ken238
This rail does not come with any size labels.
Answered by: S Church
Date published: 2017-03-17

What are the widths of the storage rail trays? You give the length (21" / 14") but no widths.

Asked by: Gil S
The five rail trays are 7 1/8" wide, and the three rail trays are 3 13/16" wide.
Answered by: MikeL
Date published: 2017-03-17
  • y_2017, m_8, d_18, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_30153, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

5 Rail Socket Holder Tray 21 in

Item #30153 Brand: Eastwood

Holds, organizes your sockets so you'll find the right one fast

In stock

Only $44.99

Sale $36.44

Details

5 Eastwood Socket Rails on 1 tray hold and organize 88 of your sockets so you can find the right one...right away.

Ever try to find a specific socket in an unorganized tool chest drawer? Good luck. Instead, keep 88 of your sockets organized and ready to go on this Eastwood-designed, 5-rail socket tray. Individual socket holders on each rail have a steel retaining ball to positively lock each of your sockets in place. Socket holder can rotate 360 degrees on the rail for fast identification of the socket you need.

  • 21"-long tray has 5 rails
  • Rail #1 holds 20 sockets (1/4"-drive)
  • Rails #2 and #3 hold a total of 36 sockets (3/8"-drive)
  • Rails #4 and #5 hold a total of 32 sockets (1/2"-drive)

More info...

About 5 Rail Socket Holder Tray 21 in

Socket rail tray organizes your socket drawer for quick and easy location of all your sockets as you work. 360-degree rotation of sockets while on the rails allow easy socket I.D. Positive locking action using a ball detent means your sockets will not fall off. Anodized aluminum extrusion, with DuPont™ Zytel® socket holders; resists all automotive fluids. Sockets not included.


Contents

21 inch long Rack holds 5 rows of sockets. 1 row 1/4 inch 16 pcs, 2 rows 3/8 inch 18 pcs each row (36 total), 1/2 inch 16 pcs each row (32 total)


Warranty

1-year warranty against manufacturer's defects.


Customer Reviews

Questions & Answers

Customers also viewed: