• Home
  • Eastwood 6 inch Dual Action Air Palm Sander

How good is it on wood?

Asked by: big lou
It works really well. Just make sure you have a big enough compressor.
Answered by: itsallgood
Date published: 2017-04-16

Will this work for wet sanding 

Asked by: Dilac12000
Yes and it works really well.
Answered by: itsallgood
Date published: 2017-04-16

Well this work with a bigger compressor with 9.6cfm at 90psi ?

Asked by: Big K
Yes, this unit will run fine on a larger compressor.
Answered by: KHoffnagle
Date published: 2016-12-16

Is there an interference pad that works with this palm sander?

Asked by: Jalopy Jay
You can use part number 11362.
Answered by: S Church
Date published: 2016-11-05

Would I be able to buff and polish with this?

Asked by: Steve4827
As far as wetsanding with a fine grit sand paper yes. you will need a hook and loop pad and a soft interface pad for optimal results. but polishing must be done with buffer.
Answered by: BodyMan156
Date published: 2016-05-27

can this be used wet?

Asked by: je1rry
This dos not have a moisture hook up, but if you use the interface pad and correct paper you can use this for wet sanding...
Answered by: KHoffnagle
Date published: 2016-04-11

My compressor is only rated at 2.4 cfm @ 90psi.  No go on this sander?

Asked by: Esilassy
I have a Makita compressor and it is rated at 6 cfm and 140 psi. It will not work or I got a bad sander.
Answered by: Eric580
Date published: 2015-08-14

I run a small body shop want to buy a sander, Sander Item #13748 Brand: Eastwood will this tool  serve me a good wile my budget is low and if the answer is no. could u refer a good one i am an a budget

Asked by: mark2
This dual action sander would be just fine for you to use in a small body shop while on a budget.
Answered by: S Church
Date published: 2016-02-18
  • y_2017, m_4, d_24, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_13748, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood 6 inch Dual Action Air Palm Sander

Item #13748 Brand: Eastwood

Eastwood 6" DA sander produces
swirl-free finishes in tight spots

In stock

Only $39.99

Sale $37.97


Eastwood's Dual-Action Palm Sander will make quick work of any sanding job.

  • 10,000 RPM Free Speed
  • Adjustable Speed Control
  • Requires 6” pressure-sensitive adhesive (PSA) sand paper
  • Requires just 2.8CFM at 90PSI.
  • 3/32 (2.5mm) Orbit
  • 5/16 x 24 Spindle Size

Just a push of the lever and the dual action of the Eastwood palm air sander will deliver a smooth, pattern-free finish. Quiet and smooth operation is achieved by the variable speed, 5 vane, ball bearing motor. Minimal pressure is all you need for perfect results every time.

More info...

About Eastwood 6 inch Dual Action Air Palm Sander

This palm grip dual-action sander is equipped with a 3/32 (2.5mm) orbit that will leave minimal swirl marks in the substrate so you can be sure you are getting a smooth, even finish.


Pneumatic Dual-Action Palm Sander
6” PSA (pressure-sensitive adhesive) Backing Pad
¼” NPT Air Fitting
Flat Wrench


Always wear appropriate eye protection. Do not exceed 90 psi (6.3 bar) of tool inlet air pressure. Do not force tool or exert side forces on pad while sanding. Wear appropriate respiratory protection. Always disconnect tool from air supply when changing discs. ONLY use 6" PSA (pressure-sensitive adhesive) sanding discs and backing pads rated for a minimum of 10,000-RPM use. Always make sure the work piece being sanded is securely clamped or anchored.


One year warranty against manufacturer's defects.


Click Here for 6" Round Eastwood Contour 6 Pack Sandpaper Disc


Click Here for 6" Round 25 Pack Sandpaper Disc


Click Here For larger Packs of 6" Sandpaper Disc

Customer Reviews

Questions & Answers

Customers also viewed: