• Home
  • Eastwood 6 Inch Dual Action Air Palm Sander

Eastwood 6 Inch Dual Action Air Palm Sander

Item #13748 Brand: Eastwood

Eastwood 6" DA sander produces
swirl-free finishes in tight spots
No additional discounts apply.

Details

Eastwood's Pneumatic Dual-Action Palm Sander gets into tight spots for fast sanding, smoothing, polishing Just push the lever down and the dual action of this Eastwood-engineered palm air sander will deliver a smooth, pattern-free finish on any sanding or polishing job, even in hard-to-reach areas. Minimal pressure is all you need.
  • 10,000 rpm
  • Adjustable speed control
  • Takes sandpaper discs with pressure-sensitive adhesive (PSA) backings
  • Requires just 2.8 cfm at 90 psi, so you can use your home compressor

More info...

About Eastwood 6 Inch Dual Action Air Palm Sander

Palm grip lets you work 1-handed (but it’s always best to use two hands, for better control). Adjustable speed control lets you match the speed to your application.

We tested this best palm sander against the best, and its performance compared positively to a leading national brand, just like you'd expect from Eastwood. Final product imported.


Contents

Pneumatic Dual-Action Palm Sander
Flat Wrench
6” PSA (pressure-sensitive adhesive) Backing Pad


Accessories

All are 6"-dia. aluminum oxide sanding discs. Get the specific grits you need, in the backing you need, and the multi-pack size you want.

Paper-Backed, 5-Pack
12141 P80-grit
12152 P180-grit
12151 P320-grit
12149 P400-grit
12148 P600-grit
50893 P1500-grit
50894 P2000-grit

Paper-Backed, 25-Pack
19626 P80-grit
19620 P120-grit
19621 P180-grit
19622 P220-grit
19623 P320-grit
19624 P400-grit
19625 P600-grit

Paper-Backed, 50-Pack
14063 P40-grit

Paper-Backed, 100-Pack
19619 P80-grit
19616 P120-grit
31359 P180-grit
31360 P220-grit
31361 P320-grit
19617 P400-grit
19618 P600-grit

Film-Backed, 100-Pack
50884 P80-grit
50885 P120-grit
50886 P180-grit
50887 P240-grit
50888 P320-grit
50889 P400-grit
50890 P600-grit

Film-Backed, 500-Pack
50883 P40-grit


Safety

Always wear appropriate eye protection. Do not exceed 90 psi (6.3 bar) of tool inlet air pressure. Do not force tool or exert side forces on pad while sanding. Wear appropriate respiratory protection. Always disconnect tool from air supply when changing discs. ONLY use 6" PSA (pressure-sensitive adhesive) sanding discs and backing pads rated for a minimum of 10,000-RPM use. Always make sure the workpiece being sanded is securely clamped or anchored.


Warranty

One year warranty against manufacturer's defects.

Final product imported.


Customers also viewed: