• Home
  • Eastwood 6 inch Dual Action Air Palm Sander
Eastwood 6 inch Dual Action Air Palm Sander is rated 4.7 out of 5 by 67.
Rated 5 out of 5 by from Very good Item for the price. This sander is light, powerful and very smooth operating. I can not complain about anything for the short time I have used it (i hour). It is fairly low on vibration which makes it easy to navigate around the body lines of vehicle I am working on. I oiled it before adding air, it did not turn....just made a hissing sound. A little nudge got it going and it seemed fine from there on. It fits well and comfortably in my hand which should allow lots of use without fatigue. ControllingAfter I have used this sander for at least 10 hours I will update my review...to this point it looks very good and I would recommend this sander to others. the speed is also effortless.
Date published: 2014-06-18
Rated 5 out of 5 by from Works great I am an autobody hobbyist and bought this sander due to the low cfm requirements. I am running it on a Husky 33 gallon, 1.5HP compressor at 90psi at the tank. My small compressor is able to keep up with continuous sanding. I haven't used it much so I can't comment on longevity of the sander but it seems to be well made for the price. There is a post below saying it is a 5 inch sander, which it isn't. It has a 5.5 inch pad, which is standard. I plan on buying the Concours paint gun as well due to low cfm requirements.
Date published: 2015-02-25
Rated 3 out of 5 by from the pad failed I bought this as a backup in case my 30 yr old D/A quit. I decided to try it for the first time. I had about a 1/2 an hour of actual use time on the sander. it fells nice in my hand, has good power and speed, adjustable air/speed valve included I was using the sander on the flat surface of the trunk of a crown vic, I had 120 grit on when the pad came apart from the attaching bolt. the bolt has a 1/2" inch square flat head that goes into a 1/4" round hole on pad back. the pad has a small crack at that point,it appears to have just spun out. I put a spare backing pad on and continued to use it without further trouble. approx. 2 hours of use time other then the pad issue I would tell a friend the unit is ok
Date published: 2016-07-24
  • y_2017, m_11, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_66
  • loc_en_US, sid_13748, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Would I be able to buff and polish with this?

Asked by: Steve4827
Yes. I just used mine for the first time to wax and buff our car. I used a hook and loop pad, a foam wax pad to apply the wax and some buffing pads to remove the wax. It turned out great. Just make sure you have a compressor that is at least 30 gal.
Answered by: itsallgood
Date published: 2017-07-31

How good is it on wood?

Asked by: big lou
It works great. I used mine to sand a balancing beam for my daughter. Just use the correct grit.
Answered by: itsallgood
Date published: 2017-07-31

I reside in Queensland Australia if I purchase this item and many others do you freight to australia

Asked by: Moto_MM
Unfortunately we do not ship internationally to individuals. We do have international distributors that may be close enough for you to work with. Check out our list here http://www.eastwood.com/customer-service-onepage#
Answered by: S Church
Date published: 2017-07-14

Will this work for wet sanding 

Asked by: Dilac12000
Yes and it works really well.
Answered by: itsallgood
Date published: 2017-06-20

Well this work with a bigger compressor with 9.6cfm at 90psi ?

Asked by: Big K
Yes, this unit will run fine on a larger compressor.
Answered by: KHoffnagle
Date published: 2016-12-16

Is there an interference pad that works with this palm sander?

Asked by: Jalopy Jay
You can use part number 11362.
Answered by: S Church
Date published: 2017-06-01

can this be used wet?

Asked by: je1rry
This dos not have a moisture hook up, but if you use the interface pad and correct paper you can use this for wet sanding...
Answered by: KHoffnagle
Date published: 2016-04-11

My compressor is only rated at 2.4 cfm @ 90psi.  No go on this sander?

Asked by: Esilassy
I have a Makita compressor and it is rated at 6 cfm and 140 psi. It will not work or I got a bad sander.
Answered by: Eric580
Date published: 2015-08-14
  • y_2017, m_11, d_24, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_13748, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood 6 inch Dual Action Air Palm Sander

Item #13748 Brand: Eastwood

Eastwood 6" DA sander produces
swirl-free finishes in tight spots

In stock

Only $39.99

Sale $29.97

Details

Eastwood's Dual-Action Palm Sander will make quick work of any sanding job.

  • 10,000 RPM Free Speed
  • Adjustable Speed Control
  • Requires 6” pressure-sensitive adhesive (PSA) sand paper
  • Requires just 2.8CFM at 90PSI.
  • 5/16 x 24 Spindle Size

Just a push of the lever and the dual action of the Eastwood palm air sander will deliver a smooth, pattern-free finish. Quiet and smooth operation is achieved by the variable speed, 5 vane, ball bearing motor. Minimal pressure is all you need for perfect results every time.

This palm grip dual-action sander is equipped with a 3/32 (2.5mm) orbit that will leave minimal swirl marks in the substrate so you can be sure you are getting a smooth, even finish.


More info...

Contents

(1) Pneumatic Dual-Action Palm Sander
(1) 6” PSA (pressure-sensitive adhesive) Backing Pad
(1) ¼” NPT Air Fitting
(1) Flat Wrench


Instructions

Click here for product instructions


Safety

Always wear appropriate eye protection. Do not exceed 90 psi (6.3 bar) of tool inlet air pressure. Do not force tool or exert side forces on pad while sanding. Wear appropriate respiratory protection. Always disconnect tool from air supply when changing discs. ONLY use 6" PSA (pressure-sensitive adhesive) sanding discs and backing pads rated for a minimum of 10,000-RPM use. Always make sure the work piece being sanded is securely clamped or anchored.

Click here to see safety products


Warranty

One year warranty against manufacturer's defects.


Accessories

Click Here for 6" Round Eastwood Contour 6 Pack Sandpaper Disc

 

Click Here for 6" Round 25 Pack Sandpaper Disc

 

Click Here For larger Packs of 6" Sandpaper Disc


Product Video


Customer Reviews

Questions & Answers

Customers also viewed: