• Home
  • Plastic Adhesion Promoter 14.75oz. Aerosol - SEM 39863

Plastic Adhesion Promoter 14.75oz. Aerosol - SEM 39863

Item #52366Z Brand: SEM

How topcoats and repair materials adhere to problem plastics

Details

How to get topcoats and repair materials to adhere to problem plastics such as PP or TPO High-tech plastic adhesion promoter will bond to PP, TPO and other automotive plastics. Easy to use with no sanding.
  • Topcoat within 15-30 minutes
  • Works on most flexible or rigid plastics, and painted surfaces
  • Use prior to SEM® Bumper Coaters

About Plastic Adhesion Promoter 14.75oz. Aerosol - SEM 39863

This high tech plastic adhesion promoter will bond to PP, TPO, and other automotive plastics. Easy to use with no sanding and topcoat within 15-30 minutes. Great when used prior to SEM Bumper Coaters.


Contents

One net wt. 14.75 oz can covers about 10 Sq feet


MSDS Sheet

Click Here for Material Safety Data Sheet


Application

Completely clean any rust, oil, moisture, dust and other debris from the substrate. Shake can well for at least one minute. Spray one coat. Apply heat (recommend 10 minutes at 140 to 250 degreesF).


Application

Completely clean any rust, oil, moisture, dust and other debris from the substrate. Shake can well for at least one minute. Spray one coat. To clear nozzle after use, turn aerosol upside down and spray until only gas propellant comes out. Apply heat. Recommend 10 minutes at 140 to 250 degrees F (60-120 degrees C).