Aerosol Injected Cleaner 11 oz Net 6 Pack

made in USA Q: Does the long extension nozzle come off? A: Yes, point the can away from you and with a slight twisting motion it will remove. It has a handy clip so you can attach it to the can. Q: Can I remove the bottom nozzle? A: No, there is no reason to remove it. It cannot be used on any other aerosol, nor has it been tested with any other aerosols. Q: Why didn't anyone else think of this? A: We're Eastwood Johnny, its what we do

66 ounces net weight

POINT AWAY FROM FACE! Always wear eye, skin and respiratory protection when using this product. Read all label instructions before use. Personal injury and property damage could occur if misused. Use in a well ventilated area away from open flame. Contents extremely flammable and under pressure Keep away from children. Harmful if swallowed. If swallowed DO NOT induce vomiting, contact physician immediately. VOC Content: MCP Maximum 1.90 13445Z Aerosol Injected Lubricant 10041z PRE Painting Prep 43098L Nitride Gloves 43090 Safety Goggles 11456 Respirator 13000 Dust mask

1. Test fit the injector tip into area to be cleaned. Make sure it fits snugly into place. 2. Put on eye protection and point away from your face 3. Make sure the part to be cleaned has two open ends or the high velocity cleaner will backfire at the user. Insert tip into orifice and gently push on the back of the can. Continue short blasts until part is cleaned. To clean a gravity feed paint gun. Disconnect air supply to paint gun. Insert short nozzle into gun cup opening and open trigger. Apply slight pressureto the back