• Home
  • Aerosol Injected Cleaner 11 oz Net 6 Pack

Aerosol Injected Cleaner 11 oz Net 6 Pack

Item #12846Z6

Directs a focused blast of cleaner to
penetrate into hard-to-reach places


Eastwood's award-winning Aerosol-Injected Cleaning System directs a focused blast of cleaner to penetrate deep into hard-to-reach places Our Aerosol-Injected Cleaning System was the 2011 Winner of Popular Mechanic's™ Magazine Editor's Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can's nozzle that creates a tight seal to force the cleaner deep into the tool or tubing, without blowback.
  • You get 6 cans of Aerosol-Injected Cleaner
  • Use on paint guns
  • Brake, transmission and fuel lines
  • Fuel injectors
  • Removes paint, grease, machining oils and other contaminants

More info...

About Aerosol Injected Cleaner 11 oz Net 6 Pack

Eastwood's Aerosol Injected Cleaner directs a focused blast of cleaner that penetrates deep into hard to reach places. This unique injection system allows you configure the application tips to your specific job. Ideal for cleaning paint guns, brake lines, transmission lines, fuel lines, fuel rails, air intake systems, carburetors and so much more.


66 ounces net weight


13445Z Aerosol Injected Lubricant 10041z PRE Painting Prep 43098L Nitride Gloves 43090 Safety Goggles 11456 Respirator 13000 Dust mask


Q: Does the long extension nozzle come off? A: Yes, point the can away from you and with a slight twisting motion it will remove. It has a handy clip so you can attach it to the can. Q: Can I remove the bottom nozzle? A: No, there is no reason to remove it. It cannot be used on any other aerosol, nor has it been tested with any other aerosols. Q: Why didn't anyone else think of this? A: We're Eastwood Johnny, its what we do


POINT AWAY FROM FACE! Always wear eye, skin and respiratory protection when using this product. Read all label instructions before use. Personal injury and property damage could occur if misused. Use in a well ventilated area away from open flame. Contents extremely flammable and under pressure Keep away from children. Harmful if swallowed. If swallowed DO NOT induce vomiting, contact physician immediately. VOC Content: MCP Maximum 1.90


made in USA


1. Test fit the injector tip into area to be cleaned. Make sure it fits snugly into place. 2. Put on eye protection and point away from your face 3. Make sure the part to be cleaned has two open ends or the high velocity cleaner will backfire at the user. Insert tip into orifice and gently push on the back of the can. Continue short blasts until part is cleaned. To clean a gravity feed paint gun. Disconnect air supply to paint gun. Insert short nozzle into gun cup opening and open trigger. Apply slight pressureto the back