• Home
  • Eastwood Aerosol-Injected Cleaner & Lubricator

Eastwood Aerosol-Injected Cleaner & Lubricator

Item #12846Z Injected Cleaner & Lubricator

Directs a focused blast to penetrate deep into hard-to-reach places


Eastwood's award-winning Aerosol-Injected System directs a focused blast of cleaner or lubricant to penetrate deep into hard-to-reach places Our Aerosol-Injected Clean/Lube System was the 2011 Winner of Popular Mechanic's™ Magazine Editor's Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can's nozzle that creates a tight seal to force the cleaner or lubricant deep into the tool or tubing, without blowback.
  • Choose below from the Cleaner or the Lubricator...or both!
  • 360-degree valves even spray upside down!
  • Ideal for cleaning or lubricating anything around the car, shop and home

More info...

About Eastwood Aerosol-Injected Cleaner & Lubricator

Aerosol-Injected Cleaner (12846Z) cleans:

  • Paint guns
  • Brake, transmission and fuel lines
  • Fuel injectors
  • Removes paint, grease, machining oils and other contaminants

Aerosol-Injected Lubricator (13445Z) lubricates:
  • Air tools
  • Speedometer cables
  • Locks and mechanisms
  • Machinery and shop equipment
  • Also use for fogging/engine storage

Unique two-piece injection system allows you to configure the application tips to your specific job. Can clip keeps extension nozzle from getting lost. The more you use this clean/lube injection system, the more uses you'll find!


1. Test-fit the injector tip into area to be lubricated or cleaned. Make sure it fits snugly into place.
2. Put on eye protection and point nozzle away from your face.
3. Insert nozzle tip into orifice and gently push the can to deliver the lubricant or cleaner. If fogging an engine, remove spark plugs and insert tip into cylinder and apply lubricant. Replace spark plugs when complete. Always store with the extension tube removed to prevent accidental discharge.


10041Z PRE Painting Prep
Nitrile Gloves
43090 Safety Goggles
11456 SAS Bandit Respirator
13000 Buff Shop Dust Mask


(Q) Does the long extension nozzle come off?
(A) Yes. Point the can away from you and with a slight twisting motion it will come off. It has a handy clip so you can attach it to the can.

(Q) Can I remove the bottom nozzle?
(A) No, because there's no reason to remove it. It can't be used on any other aerosol, nor has it been tested with any other aerosols.

(Q) Why didn't anyone else think of this?
(A) We're Eastwood, Johnny. It's what we do.


POINT AWAY FROM FACE! Always wear eye, skin and respiratory protection when using these products. Use in a well-ventilated area away from open flame. VOC content: MCP Maximum 1.90.

Customers also viewed: