- Blast Out of a Bucket Abrasive Gun
Blast Out of a Bucket Abrasive Gun
Item #22009A Brand: Eastwood
"Blasting for beginners" starts with this "Blast-out-of-a-Bucket" Abrasive Gun Kit!
- Connect this blasting gun to your compressor
- Drop the pickup tube and hose into your bucket of abrasive media
- Pull the trigger to blast!
If you're a beginning blaster on a tight budget, or you just don't need to blast that often, this is the kit for you.
About Blast Out of a Bucket Abrasive Gun
Just connect the blasting gun to your compressor (7 cfm at 80 psi), put on appropriate protection, and place the pickup tube and hose in a container of blast media. The suction head will draw the abrasive grit from the bucket into the air stream to minimize surging or skipping, then blast it out. Trigger control lets you blast when and where you want. Imported.
Heavy-duty die-cast gun includes 3 steel nozzles for small compressors.
(2) 13/64" nozzles (requires 7 CFM at 80 PSI)
(1) 1/4" nozzle (requires 15 CFM at 80 PSI)
Be sure to wear all appropriate safety equipment.
Customers also viewed:
An affordable way to media blast parts without taking up much room in your shop
100-lb. blaster has large, high-flow valves to speed rust/paint removal
50-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $119.99
Easily handles "spot" rust-removal jobs...just attach a home compressorOnly $59.99
Removes debris from blast media when you want to reuse itOnly $15.79