Nothing is worse than dripping brake fluid onto your freshly painted parts and seeing the paint damage appear before your eyes. This has been one of those issues plaguing hobbyists for years.....how many cars do you see at car shows with the remains of paint on the master cylinder? After experiencing this problem and hearing about it from our customers, we decided that we needed to develop a product that could be used on master cylinders, wheel cylinders, or anywhere else brake fluid may spill or drip. The result - Eastwood's New Brake Gray. The results are simply amazing and need to be seen for yourself.
At the SEMA show, we met up with Kevin Tetz (host of Paintucation and TRUCKS!) and told him about this new product. He wanted to see the results for himself, so we sent him a can. Check out what Kevin had to say about Eastwood Brake Gray:
"I was VERY skeptical of Eastwood’s Brake Gray brake fluid resistant aerosol paint. Brake fluid is caustic and never sleeps! I’ve had brake fluid ruin catylized urethanes when it stays unnoticed from a drip or leak….. It can break your heart and cause a ton of work in a repaint. I shot three medium coats onto a random metal piece, let it dry according to the instructions, and then dripped a half ounce of DOT 3 brake fluid on the coating and waited. By day three the only sign I had that there was a brake fluid spill was a little bit of moisture and a slight white outline of where the fluid used to be, which wiped off easily leaving the paint intact and unaffected. This is amazing! Paint for master cylinders, firewalls, frame rails, brake lines and connectors, steering shafts, anything that is around or under a master cylinder in a car or truck is now protected! Wow! More and more we’re seeing high tech paints come in the form of aerosol application, which is completely changing the stigma of the “bomb can” and bringing it into the realm of “professional” paint. 5 stars… this is an amazing product that does what it says it does."