Mocking up the Bed on Pile House.

Now that we have the cab and front end sheet metal mounted and they are a "bolt-on" affair, it's time to start tackling the job of making bed mounts, as well as stretching the bed to fit the chassis. I initially was going to shorten the chassis to match the original Dodge wheelbase, but after some time of staring at the truck, and pictures of other trucks, I decided that I think I dislike how "unproportioned" these old short bed trucks look. After some measuring of the truck, and looking at pictures of other trucks, I think the overall appearance of the truck will look more "balanced" with the front of the bed lengthened to meet the cab.

So today we chopped out the metal that was fouling the chassis from the original bed floor first, then once we dropped the bed down we found that the S10 gas tank was hitting the bed and not allowing us to move it around freely. After removing the tank we got the bed sitting about how we wanted it height-wise, and tacked up some metal rods to hold the front part of the bed at that ideal height. We also added some cross bracing inside the bed to keep it from twisting while we are chopping it up and locking it into place. This should be a great exercise to hone my metal brake and bead rolling skills that I need some freshening up on! Check out the pictures below, and keep an eye here on the blog for a lot more updates to come.

Leave a Comment