Tag Archives: chop

  • Winfield Chop Shop Tour Houston, TX - Part 2

    After the seam was welded, Gene and the crew went ahead and made a new panel for the one rear corner to make it all fit seamlessly. He used Eastwood Plastic Metal Shaping Hammers and Sandbag to form the panel and get the rough shape that was needed to fit the roof.  Click Here To Read Full Post...
  • Eastwood tools to be used in Gene Winfield Chop Shop Tour- Stop 1 Houston, TX Autorama

    This year at SEMA 2012 we were running around shooting some of our favorite show vehicles of the week. I happened to run into Gene Winfield as he was debuting his 2nd rendition of his custom Ford he calls the "Pacifica". We did a nice interview with Gene (check it out below!) to find out about the truck and also hear about what he's up to in the future. He told us about an exciting tour he was starting shortly after SEMA with Championship Auto Shows called the "Gene Winfield Chop Shop".   Click Here To Read Full Post...
  • Street Rodder Radio and Eastwood Announce 2013 Road Tour Car Build

    For the past two years we've been sponsoring the Street Rodder Road Tour and our Eastwood Summer Classic has been the kickoff event for the eastern leg of the tour. Recently we just inked the deal to once again become the official tools sponsor of the 2013 Street Road Tour build. This year the guys at Honesty Charley's Garage will be building the 2013 road tour car. The base car this year is a 1951 Ford that's in less than ideal shape.

    While at the 2012 SEMA show Brian Brennan of Street Rodder Magazine and Street Rodder Radio interviewed myself about last year's road tour car and we covered what's going into the 2013 car. We've already sent a large care package down south to Honesty Charley's Garage for the 51 Ford, and I'm sure more will be on its way soon. They'll be fabricating patch panels and performing some custom metal work on the car with our Pro Hammer and Dolly Kit, Economy Bead Roller, Versa Bend Metal Brake, Panel Beater Sandbag, and Plastic Metal Forming Mallets, and much more.

    Even though we're "officially" the tools sponsor of this car, the team asked our help in the fight against rust. Since they need to treat and seal many rusty areas on the car, they asked us to send them some of our innovative paints and chemicals. We were happy to oblige. They'll be sealing up and protecting hidden and boxed areas of the '51 Ford with our Internal Frame Coating, and treating just about the entire car and chassis with our famous line of Rust Encapsulator. You can be sure that the car will be free of ANY rust or corrosion; these guys mean business!

    Once the crew gets a little further along on the build they'll need to reassemble the car and turn it back into a roadworthy vehicle. For those mechanical projects they'll be using the full line of Eastwood Hand Tools. They'll be some of the first professionals to get their hands on our new ratchets, sockets, screwdrivers, ratcheting wrenches, aviation metal snips, and anything else a serious "wrencher" needs in their toolbox!

    Check out the full interview at SEMA at the link below. Some of the great personalities in the classic car and hot rod community today stopped by to visit Brian Brennan including Troy Ladd from Hollywood Hot Rods, Corky Coker of Coker Tires, and Brian Downard of Lokar Performance, so it's definitely worth the listen!

    http://www.streetrodderweb.com/radio/

    Watch this space as the build really is just getting started for the 2013 Road Tour Car. We'll be sure to give you some insider information on this years car as things progress!

    -Matt/EW

      Click Here To Read Full Post...
  • Chopping The Top On A 1950 Dodge Pick-Up – Eastwood’s Project Pile House- Part 3

    In the last posts we had quite a mess, the roof was in numerous pieces, A-pillars didn't line up, doors were in pieces, etc, etc. Fast forward a bit and the roof is one piece again. I decided to use the TIG 200 to weld the seam back up. I jumped around the panel laying short, low amperage TIG welds with some silver/bronze filler wire. This filler wire melts at a very low temperature and also is a bit softer making it easier to hammer and grind flat. Check out the video at the end of the article for the full step-by-step process.

    We still have years worth of body damage to address on the roof that is quite an eyesore with the roof at eye level now. But before we begin smoothing welds and banging out old dents, we need to rebuild the door frames so that we have the doors back in one piece. I built the drivers side door frame yesterday and we'll be filming the passenger side to give you an idea of the basic process to modify and reattach them. Stay tuned and thanks for following the project!

    -Matt/EW

      Click Here To Read Full Post...
  • Assembling The Roof- Cleco Panel Clamps Are The Third Hand

    The entire process of chopping the roof on a vehicle is quite long. Along the way there are a lot of tricks and tools that will make your life a lot easier; especially if you work alone. Since I wanted to keep my A-pillars in the stock configuration I had to make a filler panel to fill the gap between the front and rear half of the roof. The filler panel runs the width of the roof and it's pretty tough to hold this in place by myself as I test fit it. I found that it was much easier to hold one end in place, drill a small 1/8" hole and insert a cleco every few inches. This pulls the panel in place and I can manipulate my panel to fit exactly how I want. This also allows me to stand back and visualize how the final profile of the roof will look. Once you have a pack of clecos in your toolbox you'll wonder how you worked with out them! Check out our selection of blind panel grips here: Cleco Blind Panel Clamps

      Click Here To Read Full Post...