ESI processing not enabled ESI processing not enabled
ESI processing not enabled
  • Home
  • Blog
  • Tags
  • How To Spray Paint A Motorcycle

Tag Archives: how to spray paint a motorcycle

  • How to paint a motorcycle - Painting your motorcycle with spray paint

    Since Eastwood introduced 2K Aero-Spray (catalyzed 2-component spray paint), we have been bombarded with questions of whether or not a car or motorcycle could be painted with Aero-Spray.  The answer to that question is "yes"!

    To prove it, Eastwood's Kevin S. decided to paint his motorcycle with spray paint by using Eastwood's 2k Aero-Spray Epoxy Primer and 2k Aero-Spray Ceramic Underhood Black.  Kevin's 2004 Yamaha V Star 1100 was in good shape, but had a dent in the gas tank that needed to be fixed, plus Kevin wanted to add some custom touches.

    To start the project, Kevin tore the bike down and then stripped the paint by using Eastwood's 4.5" stipping disc kit.  To address the dent in the tank, Kevin thoroghly cleaned the tank and then used his Eastwood MIG175 and the MIG Stud Weld Kit to pull out the dent.  This worked well to get the dent worked out, then Kevin used Eastwood's Lead-Free Body Solder to smooth out the repair.

    Turning his attention to the rear of the bike, Kevin frenched in a '39 Ford teardrop taillight and added some trick LED bullet turnsignals.  To blend in the frenched taillight, a quick swipe of Contour Premium Body Filler was used.  After a quick wipedown with PRE, the tins were ready for primer.

    Kevin used 2K Aero-Spray Epoxy primer.  He let the primer dry overnight and block sanded it with 320 and 400 grit sandpaper.  After the sanded tins were tacked off, Kevin applied the 2K Aero-Spray Ceramic Underhood Black.  This paint offers a 10-20% gloss level, perfect for the look Kevin was going after. Over the course of a week, working at night, Kevin was able to transform the look of his bike.....and without breaking the bank!

    Specs of Kevin's Bike:

    2004 Yamaha V Star 1100

    1939 Ford LED Taillight Frenched into rear fender

    Single Carb intake with a S&S Super E carb

    Bullet style rear turn signals

    Dyna 3000 ignition module

    Products Used:

    MIG 175 Welder

    Eastwood Premium body filler

    MIG Stud Weld kit to pull dent in tank

    PRE Paint Prep

    2k Aerospray Epoxy Primer

    2k Aerospray Underhood Black

1 Item(s)

ESI processing not enabled