Tag Archives: lowered

    • Building Custom Mini Wheel Tubs for Pile House

      One thing a lot of longterm builds have in common is that the builder or owner tend to change their minds throughout the build. This has definitely been the case with Project Pile House. Over the past two years I've changed Pile House from being a "thrown-together" type build to something a bit more thought out and nicer. Even small items like wheel and tire combo have changed and caused me to go back and adjust things as needed.  Click Here To Read Full Post...
    • Hot Rod Homecoming 65th Anniversary Show Coverage- Part 1

      It's no secret that the west coast, specifically southern California or "SoCal" has been the hotbed for Hot Rodding. Many of the legendary customizers, race drivers, companies, and magazines called SoCal their home. By far the biggest magazine in the world of hot rodding is the one and only Hot Rod Magazine. They've been around since day one, and even through all of the ups and downs of the automotive world, they're still around, and as strong as ever. This year marked the 65th anniversary since their inception. In celebration, the crew at Hot Rod Magazine invited the entire hot rodding community to come join them at the Pomona Fairgrounds for a "Homecoming". We were already planning a trip to visit them and some of their sister magazines that week, so we stayed the weekend to catch the show and set up a small booth with our friends at Hollywood Hot Rods.

      This wasn't going to be just any car show, the Hot Rod crew dug deep into their little black book and were able to dig out some REALLY important cover and feature cars from the past 65 years. Everyone in attendance were amazed at what crawled out of the woodwork, and we're not just talking cars! Anyone with a keen eye could spot some legends of hot rodding walking there amongst us mortals.

      Saturday we spent the day breezing through the show and taking pictures of some of the cars that immediately caught our eye. We were so overwhelmed that sunday felt like an entirely different show once we dug in and took in all of the cars in attendance. The show also had some really nice "non-feature" cars that were just hitting the public for the first time. We gotta say that the quality of cars in the show were top notch by any standards. You really had to search every corner of the fairplex show grounds to see some of these cars. Check out our gallery below to see some of our favorites from Saturday. We're still digging through pictures and hopefully this week we can have the next batch up!

      Thanks to all that welcomed us East-Coasters into SoCal, showed us around, chatted with us, or stopped by our booth. We hope we can do it again!

      -Matt/EW

        Click Here To Read Full Post...
    • Bed Floor Restoration and Setting Rear Ride Height-Project Pile House

      We have been lucky enough on the east coast to have a pretty mild winter. This meant that we could really get work done AND enjoy our customs/classics throughout the winter (now I know what you west coast folks enjoy!). This meant that there was a month where I didn't get much done on Project Pile House. As the weather gets warmer and talk our our 2012 Eastwood Summer Classic stirs, I have really gotten the motivation to make some progress on the truck. Since we've already tackled getting the cab and front sheet metal mounted and stretched the bed sides, I decided to to build a new bed frame.

      The bed didn't fair nearly as well as the rest of the truck, and there wasn't much left of the bed floor. In the end I pretty much ended up cutting it all out to build new. I decided to firm the bed up by using a mix of angle iron and square box tubing. This allows me to have a nice base for the floor when it comes time to finish the bed. Since I was welding together fairly thick steel, I decided to pull out our MIG 175 and weld up the bracing on 220V. I first ground off the surface rust where I was welding the angle iron to the bedsides. I then hit up the entire perimeter of the bed where the new metal would overlap with Self Etching Weld Thru Primer to assure that the work I'm doing wouldn't rust out. Even though the truck is currently a Patina-Queen, I still want any work I do to last the life of the truck!

      With any custom vehicle, you will run into unexpected snags throughout the build. One thing I wanted to avoid was the "shallow bed effect" that you see on many lowered or classic trucks (especially ones with modern chassis). I want to actually be able to put more than a lawn chair in the bed! In order to do that I needed to move the OE chassis cross member forward a few inches to get it sitting below the bed floor. By doing this it also made the driveshaft uncomfortably close to the bottom of the cross member. I decided to notch and box the cross member before welding it back into the chassis. I may also need to cut down the top of the frame a small amount over the rear axle to keep the bed floor level, but we will tackle that later.

      From there I made mounts that tied the new floor frame into the S10 chassis and now it is a "bolt-on affair" to install the bed. With all of that done I began working on getting the rear of the truck sitting where I wanted when "aired out". Due to time constraints and to keep the 'budget-build" theme, I decided to ditch some of the leafs, install drop blocks, and build a cheap bag-on-bar air suspension setup in the rear. I don't plan to race the truck or build a high horsepower engine (yet!), so I went this route. Stay tuned as I continue working on the rear suspension and begin to get this old truck rolling again!

      -Matt/EW

        Click Here To Read Full Post...