Tag Archives: mixing paint

  • Mixing Urethane Paint- Color and Clear Coat

    Our tech hotline answers lots of calls every day about everything we sell, and how best to use it. A lot of questions are about welding and technique, and a lot of questions concern paint and applying it. We are happy to answer those, and any other automotive related topics. If we don’t have an expert on the line immediately, we’ll be sure to find out the answer from one and get back to you. Recently a customer called with a question about mixing single stage urethane paints with a urethane clear. Single stage paint already has plenty of gloss and is UV stabilized to be used as a top coat by itself. So, you may ask why mix a single stage color coat with a clear top coat? When people do this it is typically because they have been painting since the lacquer days, or the person who taught them was from that era.  Click Here To Read Full Post...
  • Slow, Medium, or Fast? Which Eastwood Urethane Paint Activator is Best?

    Concours Paint Gun

    Laying paint is a pretty simple idea when you think about it. You spray your desired color over something and let it dry and live happily ever after right? Well that may be true if you're painting a dog house, mailbox, or fencepost! It takes a little more than that to produce a quality paint job on a vehicle. There are a lot of tricks of the trade to help you lay perfectly smooth paint right out of the gun. The tip we're focusing on today is choosing the correct activator for your situation. Believe it or not using the correct activator could save you a lot of headaches, extra hours of sanding, or possibly having to respray the entire car!

    We realize you probably don't work in a climate controlled shop where you can monitor the temps. You may be spraying in your garage, in the yard, or in a temporary shed somewhere. This means the temperature outside and the weather can severely change how quickly the paint activates and "flashes" (starts to dry) as well as how well it flows out of the paint gun. We've decided to broaden our range of urethane activators into 3 simple formulas.

    Eastwood Urethane Activator

    1. Slow Activator- Slow activator is great for when you may be painting on a hot summer day when the temps are over 80F. Once you fine tune your mixture you can use this on a hot day and your paint will flow out nice and flat and you'll have enough time to lay all that you've mixed in your gun. Using this activator on too cool of a day would cause the paint to take much longer to flash and can cause imperfections in the paint. If you are in a pinch you could tweak the mix ratio, but do this with care!

    2. Medium Activator- We formulated this activator to be the best "all-around' activator when painting. If you are unsure which activator to choose, this one will work in most climates. Just remember that when you reach higher temps around 80F it may flash too quickly (causing "dry" spots) and with the temps under 70F it may take quite a while longer than normal to flash.

    3. Fast Activator- Spraying on a cool fall afternoon or on a night when the temps are under 70F? Then you need our fast activator! It will speed up the flash time and allow you lay your additional coats of paint or clear coat in a reasonable amount of time in cooler weather. In a pinch you can use our Medium activator as well, but remember it could raise your flash/cure times greatly!

    We always suggest to mix up a small batch of paint or clear coat and spray a test panel before you go at your project. Make sure you dial in your settings, mixture, and technique so you can quickly and efficiently lay your paint or clear. If you have a nice selection of Eastwood activators you can paint throughout the warm months of the year. Sadly we still haven't found the right formula to paint in those cold, snowy months.. but if we get more requests than just from Santa at the north pole.. we may look into it!

    -Matt/EW

      Click Here To Read Full Post...