Tag Archives: Pile house

  • Wiring and Fabricating a Fuse Box Mount

    One of the biggest hurdles of converting Project Pile House from “garage art” to an actual running, driving vehicle is putting some wiring into the vehicle. I’m running a carbureted small block Cheverolet V8 (SBC) so there is little to make the truck run and move under its own power, but some wiring is needed to make it street legal.   Click Here To Read Full Post...
  • Building Custom Mini Wheel Tubs for Pile House

    One thing a lot of longterm builds have in common is that the builder or owner tend to change their minds throughout the build. This has definitely been the case with Project Pile House. Over the past two years I've changed Pile House from being a "thrown-together" type build to something a bit more thought out and nicer. Even small items like wheel and tire combo have changed and caused me to go back and adjust things as needed.  Click Here To Read Full Post...
  • Custom Bomber Seat Fabrication

    To be honest, I picked just about the worst possible project vehicle I could when starting Project Pile House. It didn't have much going for it, the body was dented and rusty, the drivetrain was seized and trashed, and the interior was equally as dilapidated. My goal is to show what can be done on a budget with some key tools and a little bit of creative thinking.  Click Here To Read Full Post...
  • Building a Fuel Cell Cradle and Feeding Pile House with Fuel

    Lately I've changed gears on Pile House and I've decided to start working on getting Pile House moving under its own power. I decided to order up a plastic fuel cell from Jegs first. Once I began test fitting it at a few different spots on the chassis it was obvious that the only place I could fit it under the bed was behind the rear axle.  Click Here To Read Full Post...
  • How to Install an Aftermarket Shifter on a Chevy V8 and TH350.

    When building Project Pile House I've pretty much discarded all of the original mechanics and I've been building from the ground up. I've already installed a SBC (small block Chevy V8) engine and a TH350 automatic transmission in the truck. Next I needed to install a universal shifter that would work with the changes I've made and look "right".  Click Here To Read Full Post...