Tag Archives: shrinker

  • Custom Scratch Built Bed DIY for Project Pile House

    Project Pile House has been an ever-evolving project and like many projects, things start small and spiral out of control and next thing you know you're detailing the inside of your glove box hinges! Luckily I'm not quite that OCD about my vehicles (yet), but Pile House is now more than just a thrown-together junkyard parts runner like I originally planned. It's turned into a full blown custom and not much on the truck is original or untouched. After getting the cab, dash, hood, etc. all smoothed out and "roughed in", the original patched together bed and fenders was bothering the crap out of me every time I looked at it. The fenders looked like boat trailer fenders and were more roughed up than a boxer after a title fight, while the bed itself wasn't much better. I decided to start dreaming up a subtle custom bed.   Click Here To Read Full Post...
  • Sheet Metal Fabrication: Basic Machines & Techniques

    Sheet metal fabrication is the act of forming, shaping, and joining metal together to build and or repair a tangible part. There are many techniques and tools. It’s been done since the beginning of time when even the simplest tools were used. In this article we will share the most common and important tools, machines, and techniques for the DIY fabricator.  Click Here To Read Full Post...
  • How to form a custom airbag tub with Eastwood Tools

    Recently our friend Sean at Empire Fabrication sent us some pictures of a custom airbag tub for a bagged VW Eurovan he's building for a customer and we had to share. Follow along as he shares the Eastwood tools and process he used to build the custom bag tub.   Click Here To Read Full Post...
  • Early Summer Project Pile House Update.

    With the floor pans made up I decided to move outwards and tackle the rust in the door openings. The truck door sill on the drivers side was rotted away and the front of the door opening/jamb was rotted pretty bad. In fact the lower portion was almost non existent.  Click Here To Read Full Post...
  • Street Rodder Road Tour 51 Ford Custom- More Metal Work, Filler, and sanding.. lots of it!

    The crew at Honesty Charley and Street Rodder Magazine have been doing a great job of keeping the 2013 Road Tour car under wraps. We've been bugging them for a while for some teasers and they finally shot us a few photos to keep us enticed.

    As we mentioned in previous posts, this car has had a lot of rust repair done already and equally as much custom work done. The work continues as they are whipping up some panels for the car using their Eastwood Shrinker Stretcher Set and Plastic Metal Shaping Mallets to build some panels that needed some shape built into them. Who can guess what part they're building in the photos below?!

    While some of the guys are working on some final metal fabrication, the rest of the team are starting on the body work in the areas they customized and repaired already. The tedious job of block sanding the car has been made a little easier with the use of Soft Sander Sanding Blocks and the Adjustable Flexible Sanding Blocks. The car is moving along quickly and we hear it should be getting some primer and color any day now. As soon as we smuggle some pics of the car in color you'll be the first to see it! Stay tuned!

      Click Here To Read Full Post...