Tag Archives: slammed
In the last update I was working on cutting out metal to make the firewall and mocking up my new brake pedal setup from Speedway. Since then I've been pretty busy making something from nothing. I had to initially tackle how I was going to mount the brake booster and pedal assembly under the cab. The first problem was that where the pedal bracket needed to live the S10 chassis started to pinch in and put the pedal on a weird angle. This kit was made for an earlier frame that's mostly straight/flat and like anything with a custom build, I had to get creative.
I first used some jack stands to hold the brake assembly in place and eyeball up the position it needed to be in. I then traced out the area that the mounting pad for the pedal bracket needed to sit. I decided I could make a "cheese wedge" shaped mounting box that I could sink into the frame rail so that the pedal bracket would sit straight and everything would jive. I used 1/4" plate and copied the mounting holes to the base plate and welded the mounting bolts to the plate since they'd be hidden once the box was built. I used our Small Magnetic Welding Jig Set to square up the pieces and welded them together with the TIG200 DC Welder. The result was a strong mounting box I could sink into the frame and mount to the pedal box. I made my cuts in the chassis and mounted the box into the frame. Once I was sure it was square, I tack welded it into place with the MIG175 Welder.
Now that I had the shiny Right Stuff Brake Parts mounted in place I dropped the air suspension and checked my clearance when aired out. The booster sits a couple inches below the chassis, but even when the body is sitting on the ground the booster has 4 inches or more of clearance. I'd probably rip the front end off before the brake parts were touched. That would be a BAD section of road even here on the east coast!
My celebration of having a brake setup was cut short when I slide the Speedway brake pedal on and found that the brake pedal landed where my throttle pedal should be. I like to heel-toe my brake and throttle when driving.. but this was unacceptable! I decided to cut apart the brake pedal arm, shorten it, brace it and move the pedal over a few inches so that it sat where a brake pedal should. I also had to "clock" the mounting tab for the linkage under the pedal so that the pedal sits up high enough that it won't contact the chassis when I am pushing the pedal. I again used 1/4" steel plate and the TIG200 DC to box and brace the pedal to handle the force of pressing the brake pedal. Don't mind the rough floor in the photos, we just welded that in temporarily to keep the cab from flopping around while we worked on the roof chop and the firewall.
With the brake parts mounted in place I could finally turn my attention back to the firewall and engine/transmission tunnel. I started by making the back side of the firewall setback. I used one of our Adjustable Profile Gauges to transfer the radius of the top of the TCI Auto Transmission to the panel. After tracing out my pattern I cut the rough shape out of 16 gauge steel with our Electric Metal Shears. Now the electric shears work really great for cutting laser straight lines and gentle curves, but when you need to make a tighter radius cut those shears are out of their element. I decided to mount up one of our Throatless Shears to make the cuts I needed. The nice thing about the "throatless" shear is that you can go as slow or fast as you want so that you can make some really clean, accurate cuts. I cut out the top curves to match the top panel I made on the english wheel, then cut the transmission tunnel radius and I had my second panel of the firewall made.
Now with the back panel of the firewall channel made, I decided that I wanted to ditch the panel I made on the english wheel and form the panel out of one piece. I decided to use 18 gauge steel and form the piece using our Shrinker Stretcher Kit to make the panel match the radius of the main portion of the firewall we had made already. I cut a piece of 18 gauge a little longer than I needed and broke a 1/2" bend on each side of the panel. These edges will allow me to work them with the stretcher to get the radius I need on the panel. This panel was a little more difficult to make as I had to evenly stretch each side little by little as I went to get the shape the same on the entire panel. I actually went a little far when initially stretching the shape I needed and I had to work backwards with the shrinker in a few spots to get the panel back into shape to match the panel. That's the nice thing with metal is that you can always undo what you've done if you stretched or bent the metal a little too much. Once I got the shape close, I used the hammer and dolly to match the rolled edge we made earlier match with this new panel. Then I used Cleco Clamps to hold the pieces together.
Now that I have the pieces in place I can start to see everything taking shape. I need to tackle making the wheel tubs for the front wheels and the transmission tunnel next. I'm hoping I'll be able to start melting all of this metal together with an Eastwood Welder shortly! Thanks for watching!
It's no secret that the west coast, specifically southern California or "SoCal" has been the hotbed for Hot Rodding. Many of the legendary customizers, race drivers, companies, and magazines called SoCal their home. By far the biggest magazine in the world of hot rodding is the one and only Hot Rod Magazine. They've been around since day one, and even through all of the ups and downs of the automotive world, they're still around, and as strong as ever. This year marked the 65th anniversary since their inception. In celebration, the crew at Hot Rod Magazine invited the entire hot rodding community to come join them at the Pomona Fairgrounds for a "Homecoming". We were already planning a trip to visit them and some of their sister magazines that week, so we stayed the weekend to catch the show and set up a small booth with our friends at Hollywood Hot Rods.
This wasn't going to be just any car show, the Hot Rod crew dug deep into their little black book and were able to dig out some REALLY important cover and feature cars from the past 65 years. Everyone in attendance were amazed at what crawled out of the woodwork, and we're not just talking cars! Anyone with a keen eye could spot some legends of hot rodding walking there amongst us mortals.
Saturday we spent the day breezing through the show and taking pictures of some of the cars that immediately caught our eye. We were so overwhelmed that sunday felt like an entirely different show once we dug in and took in all of the cars in attendance. The show also had some really nice "non-feature" cars that were just hitting the public for the first time. We gotta say that the quality of cars in the show were top notch by any standards. You really had to search every corner of the fairplex show grounds to see some of these cars. Check out our gallery below to see some of our favorites from Saturday. We're still digging through pictures and hopefully this week we can have the next batch up!
Thanks to all that welcomed us East-Coasters into SoCal, showed us around, chatted with us, or stopped by our booth. We hope we can do it again!
It's been a while since we talked about the roof chop on Pilehouse, but I've been doing a lot of boring work on the smashed up old roof getting it satisfactory. Since then I decided to finally finish building the doors to match the roof. I took some pictures as I did the drivers side to show one way to do it, and I did the passenger side an alternative way to show another way you can tackle this project. We shot the video on the passenger side, but in the photos here you can see the other way to go about it.
Just like chopping the roof down, we needed to take out some height from the top of the door, split it in half, and add some width to it. That's why it's extremely handy to keep original metal that you cut off of the truck. I started by splitting the top of the door in half so we could mock up the two pieces so that they sat where we wanted them to in the door jamb.
I started with the rear portion and held it in place in the door opening and closed the door until the post met the top of the door I was holding in place. From there I made a mark on the pillar where the 2 parts overlapped. From there I could cut the excess off of the door. In the front of the door I needed to take the extra material out of the top of the door since that was the straightest part of the upper front portion of the door. If at all possibly you always want to take material out of the pillars, doors, etc where the pieces are straight and the most uniform. Cutting them on a curve makes it VERY difficult to piece things back together smoothly and get your angles correct.
Once the pieces were cut I temporarily tack welded them to the edge of the roof to get them sitting about where I wanted. With the tack welds I could still adjust the parts without them being permanently mounted. This way I could shut the door and line everything up how I wanted.
Once the front and rear sections of the door were about where I wanted them I grabbed the piece of the door I cut out of the front. This portion of the door was very close in size to the center and only required minor tweaking to get the backside contours to match up.
From there I was able to tack weld and adjust everything how I wanted and I could weld the seams all together. On the drivers side I hadn't fully cut and ground the drip rail off so I went about mocking up the door pieces. Either one will work, just be sure to use paint stir sticks or similar as spacers to leave room for seals in the door jam. With the doors welded back together the full effect of chopping the roof is visible. I think this mild chop really made Pilehouse look better. My next plans are to customize the hood and build a custom tailgate, so stay tuned for more updates.