• Home
  • Eastwood Contour Body Filler & Epoxy Primer Kit

Eastwood Contour Body Filler & Epoxy Primer Kit

Item #14999ZP Brand: Eastwood

The foundation to a great paint job



Contour™ 1-step Premium Body Filler actually inhibits rust and self-etches!

  • Rust inhibitors prevent corrosion
  • Self-etching properties create excellent adhesion
  • Superior coverage and feather-edging ability
  • 1-step process; no glazing putty required

Save time in your shop with our "all-in-1-step" custom-blended premium body filler. It contains rust inhibitors to prevent corrosion long after painting, and its unique self-etching properties bite into the surface for maximum adhesion. A great "1-2 punch" to help finish bodywork faster and more effectively!

Eastwood Gray DTM (Direct To Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance.

  • Can be used as a primer or sealer
  • Excellent adhesion and corrosion resistance
  • Fast Drying & Maintains good color holdout
  • Sand-able - 2-3 days
  • Applied Over Steel, Aluminum, Fiberglass, Body fillers, Existing finishes

Eastwood's Gray automotive epoxy primers are user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes.

More info...

About Eastwood Contour Body Filler & Epoxy Primer Kit

Contour™ 1-step Premium Body Filler
Spreads smoothly and sands beautifully to eliminate pinholes, and the feather-edging properties won’t clog sandpaper. No glazing putties needed! May be top-coated with epoxy or urethane primer. Includes 2-oz. cream hardener.

Eastwood Gray DTM Epoxy Primer


After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.


HVLP Gun: Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon: Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psi


Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be topcoated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.


  • Contour Premium Body Filler
  • Gray Epoxy Primer Gallon and Catalyst (2 sprayable gallons)
  • 180 Grit Plain Back Sandpaper
  • 25 Disc Roll of Ryhnalox 6” PSA 180 Grit


Always wear eye, skin and respiratory protection when using these products. Consult label instructions and MSDS for specific warnings and precautions. Keep out of reach of children.

Customers also viewed: