• Home
  • Body Solder Stick 1/4 lb
Body Solder Stick 1/4 lb is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Good product I used this solder for the first time over the winter to fill some dented areas in my Bike's tank. There were holes in the tank left from my stud welder and the solder provided a fuel proof seal while filling the dents at the same time. It took some getting used to, but I soon got the hang of it with good results.
Date published: 2014-07-13
Rated 5 out of 5 by from A great product ...Specifically blended for use on automotive, I have not found a better, and easier to use lead system than this one, Works great!!
Date published: 2011-02-14
Rated 5 out of 5 by from Easy to work with! It was my first time using Body Solder. I used it to fill the joint between the roof and quarter panel on a 70 GTO. Melting the lead and working it was cake! i will use this again!
Date published: 2015-01-23
  • 2015-04-24T08:57CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_31127, PRD, sort_relevancy
  • clientName_eastwood

Hello There, May I know will the part that been covered by the body solder affect the quality of the painting of the car in anyway ?

Asked by: Tinsatya
As long as it is properly prepped, meaning cleaned thoroughly, flux is all removed, ect, and an epoxy is used over it before any other work. It will not harm the paint.
Answered by: SeanA
Date published: 2015-01-08
  • 2015-04-24T09:09CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_31127, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Body Solder Stick 1/4 lb

Item #31127 Brand: Eastwood

Single 1/4-lb. stick (30% tin, 70%
lead) for long-lasting body repairs


30/70 Body Solder Stick for easy leading Individual 1/4-lb. stick makes it easier to work with. Contains 30% tin, 70% lead, for long-lasting repairs.
  • 30% tin, 70% lead
  • Ideal for auto body repair
  • Certified alloy content

Do you have a product idea?

More info...

About Body Solder Stick 1/4 lb

30/70 tin/lead solder works well on horizontal and vertical surfaces, and its low melting temperature makes this 30/70 lead solder easier to work with than lead-free solder. Quantity discount on 40 sticks or more.


One 1/4-lb. Body Solder Stick

MSDS Sheet

Click Here for Material Safety Data Sheet


********** NEVER SAND LEAD, FILE ONLY ************ Respiratory Protection- When melted, the temperature should be kept as low as possible.The respirator should have a HEPA (high efficiency particulate air) filter, also known as a N100 filter. Where airborne exposures may exceed OSHA/ ACGIH permissible air concentrations, the min. respiratory protection recommended is a negative pressure air purifying respirator w/cartridges that are NIOSH/MSHA approved against dust, fumes & mists having a TWA not less than 0/05 MG/CU M.

Customers also viewed: