Home
Buff Motor 1 1/2 hp

Buff Motor 1 1/2 hp

Item #13007

Baldor 1-1/2-HP, 10" motor
can be used at 110v or 220v

Heavyweight- Special shipping charges apply.

Details

Professional Baldor® 1-1/2-HP Buff Motor gives you years of solid performance and rugged dependability This industrial-grade buff motor from Baldor® is used in pro body shops and restoration garages, with power to spare and reliability you can trust.

Extended 30" overall shaft length; 7/8" shafts
3600 rpm
Use with 10"-dia. buffs (see "Accessories" tab)
Can be wired for 110v AC or 220v AC
3-year mfr's. warranty

About Buff Motor 1 1/2 hp

Overall shaft length is 30" to give you plenty of room to buff larger pieces. Shaft extends 7-1/4" beyond the bell-shaped, cast aluminum, sealed motor housing. Single-phase motor.

ELECTRICAL NOTE: Cord and plug are NOT included. Motor can be wired for either 110v AC or 220v AC, but is shipped pre-wired for 110v AC. Requires 13.8 amps at 115v AC or 6.9 amps at 230v AC.

1-1/2-HP, 3600-rpm Baldor Motor with 7/8" shafts
Cord and plug are NOT included

13162 Tool Stand
13070 Buffing Cabinet with Shelves
13016 Buffing Kit (10")
Buffing Compounds
13038 Spiral Buff
13062 Sisal Buff with 1/2” hole
13061 Sisal Buff with 3/4” hole
13046 Cotton Flannel Buff with 3/4” hole
13040 Loose-Section Buff with 1/2” hole
13041 Loose-Section Buff with 3/4” hole

WIRING REQUIRED: Cord and plug are NOT included. Motor can be wired for either 110v AC or 220v AC, but is shipped pre-wired for 110v AC. Requires 13.8 amps at 115v AC or 6.9 amps at 230v AC.

Wear appropriate ANSI-approved safety eye protection, ANSI-approved hearing protection, 14" or longer leather gloves, and ANSI-approved respiratory protection.