Details

About ALC Pressure Blaster 150 Pound

70 minute blasting time, 160 lb media hopper, Two 1/8" (15 cfm) nozzles, One 5/32" (7 cfm) nozzle, 15 ft. 1/2"ID hose, Blast Hood with Bump Cap, Moisture Separator. Wear all appropriate safety gear. Blast hoods provide NO respiratory protection. Be sure to wear appropriate respiratory protection.This unit requires 10 cfm @ 90 psi.

Consist of 2 packages: Package 1: Parts, weighs 24.28lbs, measures 18" Long, 12" Wide, 11" Deep Package 2: Tank only, weighs 52.153Lbs, measures 39" Long, 12 1/2" Wide, 14" Deep. The model 150 includes a 15' sand hose with quick disconnect, a moisture separator, 2 1/8" nozzles, and 1 5/32" nozzle, 3 seal blocks, and instructions.

Runs on as little as 7cfm @ 80 psi with the 3/32" nozzle. The included 1/8" Nozzle requires 15 cfm @ 80 psi and the included 5/32" nozzle requires 25 cfm @80 psi. Fill with screened dry media only. Pressure blasters work best when the valve at the bottom of the tank is only slightly opened. Wear appropriate safety gear. Be sure to wear an appropriate respirator. This unit requires 10 cfm @ 90 psi.

WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation