Search Our Site
Product Categories
- Abrasive Blasting
- Airbrush
- AutoBody
- Buffing
-
HotCoat Powder Coating
- Accessories
- Booths
- Curing Lamps
- Ovens
- Powder Coat Guns
- Powder Gun Accessories
-
Powders
- Black Powders
- Blue Powders
- Chrome Powders
- Clear Powders
- Green Powders
- Gray Powders
- High Temp Powders
- HotCoat Textured & Detail Powders
- Metallic Powders
- Orange Powders
- Powder Sampler Kits
- Powder Coat Primer
- Red Powders
- Silver Powders
- Translucent / Candy Powders
- White Powders
- Yellow Powders
- Purple Powders
- Prep/Stripping
- Interior Repair
- Metal Fabrication
-
Paints
- Airbrush
-
Auto Air Waterborne Paints
- Auto Air Basecoats
- Auto Air Candies
- Auto Air Cosmic Sparkle
- Auto Air Flairs
- Auto Air Fluorescents
- Auto Air Gems
- Auto Air Hi Lites
- Auto Air Hot Rod Sparkle
- Auto Air Iridescents
- Auto Air Metallics
- Auto Air Pearls
- Auto Air Semi Opaques
- Auto Air Sparklescents
- Auto Air Transparents
- Auto Air Sealers & Reducers
- Auto Air Instructional DVDs & Kits
- Auto-Borne Paints
- Clear Coats
- Detail Paints
- Eastwood Candeez Candy Paints
- Eastwood Single Stage Urethane Paints
- Fleet Vehicle Paints
- Pinstriping
- Primers
- Trunk Spatter paints
- Powder Paints
- Interior dyes
- Underhood paints
- Paint Equipment
- Pinstriping
- Rust Solutions
- Soda Blasting
- Specialty Coatings
- Undercar & Drivetrain
- Underhood/Engine
- Clearance
- Hot New Items
-
What our customers are saying...
"The Eastwood products are the highest quality"
- Bill from Lexington, KY
| Follow Us | |
 |
|
 |
 |
 |
 |
Today is February 9, 2010
Related Products
Check items to add to the cart or select all
Recently Viewed Items
-
EW Greaseless Compound 80 Grit
Item #13129
Community Poll
Remove coatings without etching or warping the metal. Ideal for stripping fiberglass, steel and aluminum. Strip an entire car in about 8-12 hours with 8-12 50 lb. boxes of soda. This Soda Blaster comes equipped with a 1/8" nozzle (requires 18 cfm at 80 psi), 25' by 1/2" ID abrasive hose with deadman valve, ASME certified 100 lb capacity pressure tank, blast hood and instructions. Can be used with our 22012 3/32" and 22013 1/8" ceramic nozzles. Made in USA. WARNING: Must be used with appropriate respiratory protection. See "SAFETY" for more in depth information.
Bicarbonate Soda blasting is much safer than traditional abrasives and also more gently to the metal or substrate you are blasting. However you must still protect yourself from the dust and more importantly the particles of paint, corrosion or scale that have becoming airborne during the blasting operation.
- Use a properly fitted dust mask or respirator, safety glass or safety shield, heavy gloves and long pants and a long sleeve shirt to protect any exposed skin.
- Use our safety kit # 50097 for complete protection.
- Do not aim the nozzle at any object other than the substrate you are blasting.
- Assure you disconnect the airline and allow the tank to bleed pressure before opening the fill cap.
- Check the condition of the nozzle every 1 hour of blasting and replace once wear is visible or the blast stream becomes ineffective.
- Before each use inspect the tank for any signs of corrosion, assure the rubber hoses are not dry rotted, cracked, split or any other signs of wear or abrasion from use or storage. Do not use the unit until damage components are repaired. Call Eastwood at 800-544-5118 for replacement components
- Assure the dead man valve is operating properly by depressing the valve lever and releasing- assuring it closes over the nozzle under its own spring pressure. If not do not use the dead man valve until the spring or obstruction is repaired.
- Only use fresh Eastwood brand Bicarbonate soda to assure trouble free blasting and quick paint removal
Customers who bought this item also bought:
-
Deluxe Sandblasting Hood
Item #22095
Only $39.99
-
Buff Shop Dust Mask
Item #13000
Only $4.99
-
Portable Soda Pressure Blaster
Item #11805
Only $409.99
263 Shoemaker Road, Pottstown, PA 19464 (800) 343-9353