• Home
  • Eastwood Coastal Highway Blue 96 oz. with activator kit

Eastwood Coastal Highway Blue 96 oz. with activator kit

Item #50084ZP

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

Eastwood Coastal Highway Blue is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, includes 21856ZP activator.

About Eastwood Coastal Highway Blue 96 oz. with activator kit

EW Coastal Hiway Blue is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, includes 21856ZP activator.
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.
Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


Contents

Includes: 96oz Coastal Hiway Blue 32 oz Med Temp Activator


Accessories

50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 50040ZP THRU 50042ZP PAINT PREP KITS12454Z Block sanding kit, 12252 3-gun set 20472 Air Management System 51550 Concours paint gun


Safety

Always wear appropriate eye, skin and breathing protection. consult MSDS for specific precautions and warnings


Warranty

MADE IN THE USA NSN# N/A


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.2-1.6mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours


Customers also viewed: