• Home
  • Complete Steering wheel kit low voc

Complete Steering wheel kit low voc

Item #52194 ZCA

Includes 2-part epoxy, low-voc PRE prep, adhesion promoter

Details

Repair Plastic and Hard Rubber Steering Wheels - Use this kit to repair cracks in most steering wheels. Includes 1/2 lb of PC-7 Epoxy (52195) to fill cracks, an aerosol can of Low VOC PRE Painting Prep (11949Z) to clean the surface, an aerosol can of Adhesion Promoter (52366Z) to fill minor imperfections and provide adhesion for the top coat and instructions.

More info...

About Complete Steering wheel kit low voc

Repair Plastic and Hard Rubber Steering Wheels - Use this kit to repair cracksin most steering wheels. Includes 1/2 lb of PC-7 Epoxy (52195) to fill cracks,an aerosol can of Low VOC PRE Painting Prep (11949Z)to clean the surface, an aerosolcan of Adhesion Promotor (52366Z) to fill minor imperfections and provideadhesion for the top coat and instructions.


Contents

Steering Wheel Restoration Kit includes 1/2 lb of PC-7 Epoxy (52195), aerosol can of Low VOC PRE Painting Prep (11949Z)aerosol can of Adhesion Promoter (52366Z) and instructions


Accessories

Use an additional can of (52195) 1/2 lb. PC-7 or (52047) 1 lb. PC-7 as necessary to repair larger areas. If the steering rim needs extensive repairs you may want to consider a rim transplant. See the Steering Wheel Repair Book (52017) for this and other techniques.


Application

Review manual for steering wheel removal. Wash wheel with dish washing detergent and rinse. Once dry wipe wheel down with PRE Painting Prep. Use a triangular file to "V" out crack down to metal frame. Mix equal parts of "A" and "B" epoxy PC-7 sufficient to fill defect/s. Press PC-7 into cracks and smooth with a finger dipped in water. Allow repair to fully harden overnight. Sand repair areas by hand with 220 proceeding to 320 grit abrasive paper. Wipe wheel with PRE Painting Prep and handle with clean disposable gloves. Apply Adhesion Promoter per label directions to fill minor imperfections and topcoat.


Safety

Always wear eye skin and respiratory protection when using chemicals Use in a well ventilated area away from flames Consult MSDS sheets for specific safety warnings