• Home
  • Eastwood Concours LT HVLP Paint Gun 1.3mm
Eastwood Concours LT HVLP Paint Gun 1.3mm is rated 4.0 out of 5 by 31.
Rated 3 out of 5 by from works as advertised, but has some issues I bought this to use on a 29 gallon compressor, but by the time I used it I bought a 60 gallon. The air consumption is almost funny, it barely uses any. Even if you have a huge compressor, its nice not having it kick on and stay on while spraying. #1 issue thats not a big deal, a 600mL cup is too small and Eastwood does not offer a 1000mL for it, but thats ok I bought one for $20 elsewhere. #2 issue and a significant one, the black coating on the outside of the gun is also on the inside, and its slowly coming off and shooting out the tip. not cool. I primarily use it with the 2.0mm nozzle for spraying evercoat slick sand.
Date published: 2016-05-16
Rated 5 out of 5 by from Concours LT gun performed as advertised. I bought this gun to paint a 1931 Ford roadster with correct for the period acrylic lacquer and hadn't painted a car in about 30 years. I followed the setup instructions to the letter and made sure I had correct air pressure at the gun using a pressure gauge at the gun, a 1.3 tip and it performed flawlessly for both color coat as well as clear coat. I used a 29 gallon compressor with an oil and water filter set up in line and I was super pleased with the quality of the results I was able to achieve. The finish will only need minimal color sanding and buffing to get the final finish I want. I would absolutely recommend the Concours LT gun to anyone wanting to do their own paint.
Date published: 2015-11-03
Rated 5 out of 5 by from Concours LT gun. Needed a gun that would spray clear and I'm a rookie painter. I didn't want a really expensive gun because I don't paint very often. I'm painting my "54" 1/2 ton chevy truck using this gun using your Cruise Night Blue paint and it sprays beautifully. It adjusts well I can make the pattern very small for tight areas without running the paint. I'm very pleased with the gun. I've never sprayed with an expensive gun so I don't know what the difference would be. One thing that's NOT very good is you need the eyes of an eagle to see the graduations on the cup......come on Eastwood how did you miss that?...Anyway keep up the good work.
Date published: 2016-07-25
  • y_2017, m_8, d_18, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_US, sid_15639, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

This maybe a silly question but , the cfm 4 @ 30 psi, is this at the gun or with the trigger pulled all the way? Also is there a maximum pressure for this gun?

Asked by: Jamsie
The CFM consumption would be with the trigger pulled all the way. As for maximum pressure you generally do not want to run above 30 PSI as this would cause over atomization of the paint.
Answered by: S Church
Date published: 2017-08-15

Will a compressor rated at 3.7CFM @ 40PSI be ok?

Asked by: UnkleWilly
This gun will not operate correctly lower than the required 4 CFM@ 30 PSI.
Answered by: S Church
Date published: 2017-07-26

Will this gun work with stains and polyurethane for wood?

Asked by: DWJM2513
Yes and it works very well. My main purpose for this gun is to apply stain to our porch and fence.
Answered by: itsallgood
Date published: 2017-08-08

Can this gun shoot flake? I imagine so with the 1.7 or 2.0 tip ?!?! I'm only painting small parts but flake is a must. Thanks!!!

Asked by: Tack Bradley
This spray gun can certainly spray flake. Most flakes will even spray through the 1.3 tip that would come with it.
Answered by: S Church
Date published: 2017-08-18

Is there a 3M PPS adapter that will fit this gun?

Asked by: Sancho1388
This paint gun would require the PPS number 2 adapter.
Answered by: S Church
Date published: 2017-06-08

Will the 1.3 tip work for painting metallic base or should a 1.4 tip be used?

Asked by: yama
The 1.3 will be perfect.
Answered by: S Church
Date published: 2017-03-30

How much cfm is required for the 1.7 and 2.0 tips for this gun?

Asked by: TroubleRS
4 cfm
Answered by: driveway auto body
Date published: 2017-03-14

what size tip for epoxy primer and what size for contour polyester primer surfacer

Asked by: 62 buick
for primers go with the 1.7
Answered by: driveway auto body
Date published: 2017-03-14
  • y_2017, m_8, d_22, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_15639, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Concours LT HVLP Paint Gun 1.3mm

Item #15639 Brand: Eastwood

Professional quality painting with just home compressor levels of air flow

In stock

Only $79.99

Sale $69.97



Professional quality painting with a home shop compressor.

  • Professional quality painting from a home compressor
  • Low CFM – requires just 4CFM @ 30PSI
  • Great atomization & wide spray pattern
  • 1.3mm base coat/clear coat nozzle included
  • Compatible with all types of coatings
  • Stainless internal passages & brass air cap
  • 1.5mm, 1.7mm, and 2.0mm nozzles available

The Eastwood Concours LT HVLP paint gun has many features of the professional guns, but it was specially designed to require the least amount of air possible. This makes it ideal for the home user without a big 80 gallon compressor. The aluminum body is anodized to resist corrosion, and all the internal passages are stainless steel for use with solvent or water based paints. Engineered specifically for great atomization and a wide spray pattern with high transfer efficiency and little overspray. A brass machined aircap is includes as well as a 1.3mm nozzle ideal for base coats or clear coats. Additional nozzles available in 1.5mm (#15641), 1.7mm (#15642) and 2.0mm (#15643) sizes. Gun comes complete with plastic cup and cleaning kit.

More info...

About Eastwood Concours LT HVLP Paint Gun 1.3mm

The Concours LT provides great atomization and wide spray pattern at an econmical price. The LT has excellent transfer efficiency with little overspray. Aluminum anodized body for chemical and paint resistance. Brass machined air cap, stainless steel passages and durable construction for years of reliable service. Compatible with solvent and waterborne coatings. Includes 1.3mm nozzle size, with optional sizes available separately. Includes plastic cup, cleaning and kit. Operates on only 4.25 CFM at 30 psi, ideal for small home type compressors.


Contains one each of the following: Concours LT HVLP Paint Gun, 600cc Plastic Paint Cup, Paint Gun Wrench, Cup Filter, Tube Brush and Flat Brush


SAS Bandit Respirator
Eastwood PRE Painting Prep
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Painting Tack Rags
Devilbiss Dekups 24oz
Painters Masking Tape
Painters Masking Paper
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Razor Blades


Please note that many variables affect the adjustment of a paint gun including paint viscosity and type, atmospheric conditions such as humidity, barometric pressure and temperature as well as air inlet pressure and operator preference. Always 'tune' the gun before each use as prevailing conditions may not be the same as the previous use. It is always best to test spray on sheets of cardboard or masking paper with the actual paintyou will be applying while making your adjustments to become familiar with the gun and achieve the ideal Fluid Control Setting.


Always wear eye, skin and respiratory protection when painting. Always paint in a well ventilated area. Follow paint manufacturer's instructions and MSDS for specific safety warnings and precautions.


1 year warranty


A 5/16in I.D. minimum air hose at a 25' maximum length is strongly recommended for bestrresults. A smaller I.D. hose and greater length may produce unsatisfactory results. A clean, dry, regulated air supply is required. The use of an additional 'on the gun' regulator is strongly recommended to accurately control gun pressure while painting. Clean out the paint cup as well as the paint gun air and paint passages with a solvent such as Eastwood PRE or acetone to remove any residual manufacturing impurities before use. Dry thoroughly.

Customer Reviews

Questions & Answers

Customers also viewed: