- Contour Glazing Putty 5 ounce
Contour Glazing Putty 5 ounce
Unlike other glazing putties, it can be spread over larger areas to fill imperfections without distorting contours. Easily spreads very thin and can be sanded to an ultra-thin feather edge. Use over sanded substrates, steel and galvanized steel. Can also be mixed with body fillers to improve their spreading and sanding ability. 5-ounce net weight. Includes cream hardener.
About Contour Glazing Putty 5 ounce
Eastwood's Contour Polyester Glazing Putty is designed to fill pinholes, sanding scratches and minor imprecations prior to painting. Unlike other glazing putties, it can be spread over larger areas and fill imperfections withoutdistorting contours. Easily spreads very thin and can be sanded to an ultrathin featheredge. Use over sanded substrates, steel and galvanized steel. Canalso be mixed with body fillers to improve their spreading and sandingability. 5 ounce net weight, Includes cream hardener
5 ounces net weight
10041Z PRE Painting Prep 13520ZP Contour Premium Filler 13919 Eastwood Filler Spreaders31273 Eastwood Filler Mixing Board31160 Dura Block Sanding Boards21538 Larry Lyles Body Work DVD43579 DA Orbiting Sander14292 Spring steel body spreaders
Always wear eye, skin and respiratory protection when using this productalways apply in a well ventilated area.consult MSDS and product label for specific safety warnings
made in Canada, 90 day defect warranty
Surface must be clean and free of wax, grease and debris.Abrade surface using 36 grit, or finer.Thoroughly mix desired amount of material with cream hardener.Do not exceed 1/4 inch depth. Allow to cure 15 min before sanding.Abrade with 120 to 180 grit to desired contour. Use a finer abrasive to achieve finer finish If necessary, apply Eastwoodâ€™s Polyester Glazing Putty final finishing. Topcoat with quality primer such as Eastwoodâ€™s Epoxyor Urethane Primers. Do NOT return catalyzed material back into can.
Customers also viewed:
Push the lever for feather edging, metal prep, finish work on body filler
Spray-on a "show-car" finish; powered by your home compressor
Sands all types of flat and contoured surfaces; use wet or dry
Removes silicone, wax, polish, grease; promotes paint/powder adhesion