- Contour Light Weight Micro-Strand Body Filler 3L
I have a rusted area on a floor panel that isn't bad enough to replace. I have treated the area with Ospho. Will this product work over Ospho treated rusty metal?
Can I use this over welded metal (steel)
Can I use this over a latex primer... (rust encapsulator)?
Contour Light Weight Micro-Strand Body Filler 3L
Item #14756ZP Brand: Eastwood
About Contour Light Weight Micro-Strand Body Filler 3L
Eastwood's Contour short strand filler is a multi purpose, high strength short fiber reinforced filler designed to repair rusted out spots, holes, tears and cracks on fibreglass, regular and galvanized steel, aluminum and SMC. This waterproof formulation also provides excellent featheredging and sanding properties. Can be used with or without fiberglass matting. Cream hardener included.
.8 US Gallon, 3 Liters
13521 ZP EW Contour Glazing Putty10041Z PRE Painting Prep13919 Eastwood Filler Spreaders31273 Eastwood Filler Mixing Board31160 Dura Block Sanding Boards21538 Larry Lyles Body Work DVD43579 DA Orbiting Sander14292 Spring steel body spreaders
Always wear eye, skin and respiratory protection when using this productalways apply in a well ventilated area.consult MSDS and product label for specific safety warnings
made in Canada, 90 day defect warranty
Surface must be free of grease and dirt, use PRE Painting Prep . Abrade metal surfaces using 36 grit, fibreglass with 180 grit. For maximum adhesion, apply directly to bare metal. 6. Mix the desired quantity of product with hardener. Apply mixed product using a clean spreader. Avoid filling depth greater than 1/4 inch. Allow to cure thoroughly, at least 20 minutes before sanding. Sand with 24 to 36 grit to achieve desired contour. If required, continue with quality body filler or glazing putty until desired smoothness is achieved. Topcoat with a premium quality primer, such as Eastwood's Epoxy or Urethane
Customers also viewed:
Includes 3 flexible sanders, plus abrasive paper and guide coatOnly $189.99
Sands all types of flat and contoured surfaces; use wet or dry
Removes silicone, wax, polish, grease; promotes paint/powder adhesionOnly $9.99
For hand-sanding of flat surfacesOnly $19.99