• Home
  • Contour Premium Body Filler 25.3 oz
Contour Premium Body Filler 25.3 oz is rated 4.25 out of 5 by 4.
Rated 4 out of 5 by from fastest mudslinger in the west Contour body filler sets quickly, and sands to a beautiful easy to finish substrate.
Date published: 2014-12-09
Rated 5 out of 5 by from Easy to use I am relatively new to body work and I found this product easy to use. It went on easily and looked great after I sanded it. Other reviews were right, the can does arrive about half full. Also, it dried a little faster than I expected, so I had to work faster than with other body fillers that I've used before.
Date published: 2015-05-03
Rated 3 out of 5 by from contour premium body filler Very happy with the way the product worked, not happy with the amount of product in the can. It was only half full! Might want to talk to quality control about that.
Date published: 2015-04-29
Rated 5 out of 5 by from great stuff Works well and so far no problems. Could supply a bit more hardener just in case the cap is left off or something.
Date published: 2015-03-06
  • 2015-05-24T13:35CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_14757ZP, PRD, sort_relevancy
  • clientName_eastwood

Can this be used on a plastic bumper to smooth small gouges?

Asked by: Tom Good
Yes, it can be used on plastic in small amounts. A better product to use would be the Contour Glazing Putty. http://www.eastwood.com/eastwood-contour-glazing-putty.html
Answered by: NickC
Date published: 2015-03-12

What is the maximum temperature range for this product when cured? ie... filling in welds or gaps in BBQ grills?

Asked by: Don273
Polyester fillers can generally withstand surface temperatures of approximately 250F. For your application, High Temp Lab Metal is a product that can withstand 1000F. http://www.eastwood.com/hi-temp-lab-metal-24-oz.html
Answered by: NickC
Date published: 2014-12-29
  • 2015-05-24T14:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_14757ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Contour Premium Body Filler 25.3 oz

Item #14757ZP Brand: Eastwood

Contains rust inhibitors to prevent corrosion

Details

Eastwood's custom-blended Contour Premium Body Filler contains rust inhibitors to prevent corrosion long after paint has been applied. Its unique self-etching properties bite into the surface for excellent adhesion. This unique formula spreads and sands beautifully, thus eliminating pinholes. Furthermore, its excellent feather-edging properties won't clog up sandpaper. This premium body filler is a true one-step application, since no glazing putties are required. Includes hardener. 25.3-ounce net weight.

More info...

About Contour Premium Body Filler 25.3 oz

Eastwood's custom blended Contour Premium Body Filler contains Rust Inhibitors to prevent corrosion long after paint has been applied. Its unique Self Etching properties bite into the surface for excellent adhesion. This unique formula spreads and sand beautifully thus eliminating pinholes. Furthermore, its excellent feather edging properties won't clog up sandpaper. This premium Body Filler is a true one step application as no glazing putties are required. Includes hardener, 25.3 ounce net weight


Contents

25.3 ounces net weight, 750 mL


Accessories

13521 ZP EW Contour Glazing Putty10041Z PRE Painting Prep13919 Eastwood Filler Spreaders31273 Eastwood Filler Mixing Board31160 Dura Block Sanding Boards21538 Larry Lyles Body Work DVD43579 DA Orbiting Sander14292 Spring steel body spreaders


Safety

Always wear eye, skin and respiratory protection when using this productalways apply in a well ventilated area.consult MSDS and product label for specific safety warnings


Warranty

made in Canada, 90 day defect warranty


Application

Surface must be clean and free of wax, grease and debris. Abrade surface using 36 grit, or finer. Thoroughly mix desired amount of material with 2% liquid hardener. Do not exceed 1/4 inch depth. Allow to cure 15 min before sanding. Abrade with 40 to 80 grit and follow up with 120 grit to desired contour 5. If necessary, apply Eastwood’s Polyester Glazing Putty (13521zp) for final finishing. Topcoat with quality primer such as Eastwood’s Epoxyor Urethane Primers. Do NOT return catalyzed material back into can.


Customers also viewed: