Search Our Site
Product Categories
- Abrasive Blasting
- Airbrush
- AutoBody
- Buffing
- HotCoat Powder Coating
- Interior Repair
-
Paints
- Airbrush
-
Auto Air Waterborne Paints
- Auto Air Basecoats
- Auto Air Candies
- Auto Air Cosmic Sparkle
- Auto Air Flairs
- Auto Air Fluorescents
- Auto Air Gems
- Auto Air Hi Lites
- Auto Air Hot Rod Sparkle
- Auto Air Iridescents
- Auto Air Pearls
- Auto Air Semi Opaques
- Auto Air Sparklescents
- Auto Air Transparents
- Auto Air Sealers & Reducers
- Auto Air Instructional DVDs & Kits
- Auto-Borne Paints
- Clear Coats
- Detail Paints
- Eastwood Candeez Candy Paints
- Eastwood Single Stage Urethane Paints
- Pinstriping
- Primers
- Trunk Spatter paints
- Powder Paints
- Interior dyes
- Underhood paints
- Paint Equipment
- Pinstriping
- Rust Solutions
- Soda Blasting
- Specialty Coatings
- Undercar & Drivetrain
- Underhood/Engine
- Clearance
- Hot New Items
How to Info
-
What our customers are saying...
"The Eastwood products are the highest quality"
- Bill from Lexington, KY
|
||
Today is November 21, 2009
Related Products
Check items to add to the cart or select all
Community Poll
Devilbiss Paint Gun Starter Kit - The smarter alternative to paint guns. This set includes a large HVLP gravity spray gun with 1.3mm fluid tip for top coats, extra 1.8mm fluid tip for primers and heavier materials and a 600 cc (20 oz) gravity cup (requires 13 cfm at 30 psi); mini- HVLP detail spray gun with a 1.0mm fluid tip, 130 cc (4 oz) gravity cup (requires 8 cfm at 30 psi), tool kit and accessories. Packaged in blow-molded case with handle.
Spray Gun Specifications
30 psi inlet pressures delivers 10 psi air cap pressure at 13 cfm air volume.
Air inlet: 1/4"NPS
Touch Up Spray Gun Specifications:
30 psi air cap pressure at 8 cfm air volume.
Air inlet:1/4"NPS
Spray Gun Specifications
30 psi inlet pressures delivers 10 psi air cap pressure at 13 cfm air volume.
Air inlet: 1/4"NPS
Touch Up Spray Gun Specifications:
30 psi air cap pressure at 8 cfm air volume.
Air inlet:1/4"NPS
Contains 2 devilbiss Starting Line Guns large HVLP with 1.8mm tip and 600ml metal cup 1.3mm tip for the large gun small detail gun with 1.0mm tip and plastic cup cleaning kit and wrench Regulator tool kit Blow molded case
29953 DeKups Strater Kit 50040 Master paint Prep kit 10041Z PRE paint prep aerosol 12817 Paint Gun accessory kit 51136 EW Paint Chip Chart 19830 3M Respirator 20474 4-stage dry air system Rebuild kits: small gun #20461, Large gun #20460
What are the compressor requirements? The large guns need 30 psi @ 13 cfm the smaller gun needs 30 psi @ 8 cfm. Will these guns work on any kind of paint? These were designed for solvent based paints, primers and clears. How do I paint? Check out eastwood's full line of training books and DVDs. How do I avoid compressor moisture from ruining my paint job? Check out our full line of air dryers and filter- type in keyword "Air management".
Always wear a NIOSH approved respirtaor, eye protection and skin protection when painting. Consult paint labeling and MSDS for exact safety precautions. Always paint in a ventilated area away from open flames or sparks. Consult local and federal laws when disposing of excess paints, primer clears and solvents. To increase paint gun life, dissemble and clean the gun as soon as you are done painting.
Customers who bought this item also bought:
-
Gravity Feed Paint Gun Stand
Item #34008
Only $ 19.99
-
Paint Strainer Set Fine Medium And Coarse
Item #34057
Only $ 39.99
-
Paint Mixing Cup Set 13 pc
Item #34131
Only $ 18.99
263 Shoemaker Road, Pottstown, PA 19464 (800) 343-9353