• Home
  • USC Defender Kevlar Bed Liner Kit 16002

USC Defender Kevlar Bed Liner Kit 16002

Item #14746ZP Brand: Urethane Supply Company

Formulated with Kevlar, to be more scratch- and chip-resistant than urethane

Details

The Defender Epoxy Truck Bedliner kit is the only bedliner formulated with Kevlar. More scratch and chip resistant than urethane. Defender's epoxy formulation offers bare metal adhesion and chemical resistance not found in conventional urethane's. Just scuff, prep and apply; no primer necessary. The only one with Kevlar (20x stronger than steel) Defender offers maximum protection and durability. The Defender is User friendly and makes it easy to achieve consistent results job after job. Spray it. Roll it. Brush it. Touch it up. Moisture and UV resistant too. 1 Gallon kit covers 80 square feet at 15-20 mils

About USC Defender Kevlar Bed Liner Kit 16002

The Defender Epoxy Truck Bedliner kit is the only bedline formulated with Kevlar. More scratch and chip resistant than urethanes. Defender’s epoxy formulation offers bare metal adhesion and chemical resistance notfound in conventional urethanes. Just scuff, prep and apply; no primer necessary. The only one with Kevlar (20x stronger than steel) Defender offers maximum protection and durability. The Defender is User friendly and makes it easy to achieve consistent results job after job. Spray it. Roll it. Brush it. Touch it up. Moisture and UV resistant too. 1 Gallon kit covers 80 square feet at 15


Contents

One Gallon Sprayable KitCovers 80 sq. ft. @ 15 20 milsIncludes: 1600 DEFENDER Truck Bed Liner (2 Quarts), 1635 Activator (2 Quarts), 2½ Quart Painter’s Pail (2)Wooden Stir Sticks (2), Instruction Sheet


Accessories

50441 Undercoating Gun, 19867 pro Undercoating Gun, 10041z PRE Painting Prep, 14742 Plastic Sheeting, 31057 Sanding Board, 31160 Sanding Block Kit, 31366 40 grit sanding paper roll, 14063 6 inch Round Sanding Discs


Application

Surface Prep: Prior to sanding, remove all surface contaminants by properly cleaning the truck bed with PRE painting Prep, 10041 Z. Do not use reducers or thinners to clean the truck bed.
2. Protect the vehicle from over-spray by masking areas that will not be coated.
3. Remove all rust by grinding or sandblasting. Blow the surface to remove grinding and sandblasting debris.
4. Sand the truck bed with 40 120 grit sandpaper. Blow the surface to remove sanding dust.
5. Clean the truck bed again with PRE Allow the truck bed to thoroughly dry.


Safety

VOC's 2.9lbs/Gallon. Always weare eye, skin and respiratory protection. Apply in well ventilated area away from open flame.


Warranty

Made in USA


Application

Surface Prep: Prior to sanding, remove all surface contaminants by properly cleaning the truck bed with PRE painting Prep, 10041z. Do not use reducers or thinners to clean the truck bed. 2. Protect the vehicle from overspray by masking areas that will not be coated. 3. Remove all rust by grinding or sandblasting. Blow the surface to remove grinding and sandblastingdebris. 4. Sand the truck bed with 40 120 grit sandpaper. Blow the surface to remove sanding dust. 5. Clean the truck bed again with PRE Allow the truck bed to thoroughly dry.