• Home
  • DEI Boom Mat HD Damping Material 9 sq ft 050230

Is this product suitable for lining the hood of my vehicle or does the engine heat prohibit it's use underhood?

Asked by: Shadow
The product linked below is designed for lining the hood of your vehicle. http://www.eastwood.com/dei-underhood-thermal-acoustic-050130-12-sq-ft.html
Answered by: MikeL
Date published: 2015-03-15

There was a mat in the rear of my 77 corvette. about an 1/8" thick 18" X 36" roughly. very heavy rubber/asphalt type material that crumbled when I picked it up. Would this be a suitable replacement?

Asked by: bmankin
This would be a more suitable and efficient replacement over the OEM sound deadner in the car.
Answered by: SeanA
Date published: 2014-11-25

would this sound proofing material work on a 4x6 box

Asked by: cosmokramer1
You would need more than one 9 sq ft box to entirely coat your 4x6 box (24 sq ft), if you wish to coat the full surface area.
Answered by: NickC
Date published: 2014-09-25

How thick is this material? Would it be suitable for under the rear seat and up against the rear inner fenders?

Asked by: TomNB
  • 2015-04-26T10:31CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_30524, PRD, sort_recentAnswersFirst
  • clientName_eastwood

DEI Boom Mat HD Damping Material 9 sq ft 050230

Item #30524 Brand: Design Engineering, Inc.

Boom Mat Heavy Duty Damping Material is the best choice to stop annoying vibration of large flat panels in trucks, vans and trailers

Details

Boom Mat Heavy Duty Damping Material is the best choice to stop annoying vibration of large flat panels in trucks, vans and trailers

Boom Mat Heavy Duty Damping Material is the best choice when you need to stop vibration on large flat panels like those in vans, SUVs, trailers and box trucks. Specially designed to provide the most vibration damping of any mat on the market. Provides thermal insulation and corrosion protection too. Easily trimmed to the needed size and shape, can be bent and shaped to conform to nearly any clean surface. The sticky adhesive backing makes installation simple - vertically, horizontally, or even upside down. Once installed this Heavy Duty Damping Material provides a black wrinkle finished surface that can even be painted.

  • The most effective vibration and noise eliminating product
  • Simple peel and stick application
  • Easily trimmed and shaped to size
  • Black wrinkled finish that can be painted
  • Perfect for van, camper and trailer walls

More info...

About DEI Boom Mat HD Damping Material 9 sq ft 050230

Boom Mat Heavy Duty Damping material is the most effective noise and vibration eliminating product on the market, designed specifically for large flat panels. It is user friendly, easy to install, and provides a black, paintable wrinkle top layer for a finished look. Its adhesive backing is strong enough to hold it inverted, even in hot or cold applications.


Contents

24 inch X 54 inch, 9 Square Feet


Safety

Always wear proper hand and eye protection when working on a vehicle.


Warranty

Made in the USA


Customers also viewed: