- Devilbiss 2 Gun Kit & DeKups System
Devilbiss 2 Gun Kit & DeKups System
Item #50199 Brand: DeVilbiss
- Large HVLP Gun for spraying top coats, primers and heavier materials
- Mini Spray Gun for detail work
- 3 Tips, 2 Cups, Regulator and Tool Kit
- DeKups Starter Kit makes clean-up easier
About Devilbiss 2 Gun Kit & DeKups System
Take on any big automotive painting job with this 2-gun DeVilbiss® Kit that includes a large HVLP Gun for top coats, primers and sprayable body fillers (includes 1.8mm and 1.3mm tips), and one Mini Spray Gun for detail work (1.0mm fluid tip). Air inlet for both: 1/4" NPS. Also includes 2 aluminum paint cups (600cc and 130cc), gun-mounted air regulator, and cleaning and adjustment tools. One-year mfr's. warranty. Gun rebuild kits available; see "Accessories" tab.
The DeKups Starter Kit from DeVilbiss (included) helps you avoid paint spills and eliminate cup cleaning. DeKups are easier to use than other disposable systems because they lock-on the gun better and are easy to remove and replace. 34-oz. starter kit includes: StartingLine and FinishLine gun adaptors, 2 reusable cups and collars, 32 disposable liners and lids, 10 funnels, 10 filters, 10 shaker plugs, 10 measuring guides.
Large HVLP Gun for top coats, primers, and heavier materials
Mini Spray Gun for touch-up and detail work
3 Tips, 2 Cups, Regulator, Tool Kit and Storage/Carry Case
DeKups Starter Kit
50040 Master Paint Prep Kit
10041Z PRE Paint Prep Aerosol
12817 Paint Gun Accessory Kit
51136 EW Paint Chip Chart
20474 4-Stage Dry Air System
Rebuild Kits: Small Gun #20461, Large Gun #20460
(Q) Will these guns work with any kind of paint?
(A) These were designed for solvent-based paints, primers and clears.
(Q) What are the compressor requirements?
(A) Large gun: 13 cfm @ 30 psi. Detail gun: 8 cfm @ 30 psi.
(Q) How can I learn to paint competently?
(A) Check out Eastwood's full line of training books and DVDs.
(Q) How do I prevent compressor moisture from ruining my paint job?
(A) See our full line of air dryers and filters. Search for "air management".
Always wear a NIOSH-approved respirator, eye protection and skin protection when painting. Consult paint labeling and MSDS for exact safety precautions. Always paint in a ventilated area away from open flames or sparks. Consult local and federal laws when disposing of excess paints, primers, clears and solvents. To increase paint gun life, dissemble and clean the gun as soon as you are done painting.
Customers also viewed:
General-purpose regulator gauge; 0-125 psi, 60 cfmOnly $149.99
Holds up to 3 gravity-feed spray guns at one time for fillingOnly $30.99
Reusable strainers remove almost any contamination from paints, thinnersOnly $49.99