- Urethane Primer Kit
Urethane Primer Kit
Item #12554ZP Brand: Eastwood
Eastwood Urethane primer is a two-component gray surfacer designed for overall jobs.
- Mixes 4:1 with 50241ZP Activator
- Fills well and builds quickly
- Dries fast and easy to sand
- Apply over epoxy primer, body filler, existing finishes
It fills well, sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over Eastwood Epoxy primers, old paint, body filler & even bare metal. Ideal for block sanding in 3-4 hrs after application. kit makes 5 spray-able quarts, includes medium speed activator. Primer is VOC 4.8 lbs per gallon.
This Kit Includes
- 50240ZP Eastwood 4:1 Urethane Gray Primer Gallon
- 50241ZP Eastwood 4:1 Primer Activator Quart
- 12416Z Eastwood Black Guide Coat
- Large Painters Coveralls
- 5 Piece 1 Quart Mixing Cups
About Urethane Primer Kit
After shaking/stirring primer, thoroughly mix four parts 2K Urethane Primer Sur- facer with one part Urethane Primer Activator
To reduce film build, 4:1 mixture may be cut by up to 20% with a urethane-grade reducer or other appropriate solvent product. Doing this may also improve the flow and leveling of primer. Eastwood suggests using a Zero -VOC reducer to avoid potential compliance issues. Use caution in mixing materials as epoxy primer may begin to gel after approximately two hours (at 70 °F).
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.4-1.6 mm Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Spray Pressure 40-50 psi
Conventional Siphon: Fluid Tip: 1.4-1.8 mm Spray Pressure 40-50 psi
Eastwood 2K Urethane Primer Surfacer should be applied in two medium wet coats, with a 10-15 minute flash period between each (at 70 °F). Typically, two coats is enough to achieve the desired 2 mil. dry film thickness, though more material may be applied as needed.
Urethane Primer Surfacer may be topcoated after approximately 30 minutes, or up to 18 hours (at 70 °F with sufficient cross-ventilation), with no additional prep required. After 18 hour recoat window, primer MUST be sanded prior to topcoat application for adhesion purposes.
May be wet sanded after 2-3 hours, or block sanded (dry) after 3-4 hours.
50240ZP Eastwood 4:1 Urethane Gray Primer Gallon
50241ZP Eastwood 4:1 Primer Activator Quart
12416Z Eastwood Black Guide Coat
Large Painters Coveralls
5 Piece 1 Quart Mixing Cups
Eastwood Urethane Reducer Medium
Eastwood PRE Painting Prep
Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip
Eastwood Branded Color Paint Chart
Eastwood 4 Stage Desiccant System 1/2" NPT
Paint Gun Accessory Kit
Eastwood 1/4" Digital Regulator
Eastwood Aerosol-Injected Cleaner & Lubricator
Product Information Sheet
Always wear eye, skin, and breathing protection when painting.
Made in USA 1 Year Warranty NSN # - None
Customers also viewed:
2-component gray surfacer designed for overall jobsOnly $89.99
Low VOC Urethane Primer Gal KitOnly $119.99
2K AeroSpray™ High Build Urethane Primer GrayOnly $24.99
2K AeroSpray™ High Build Urethane Primer BlackOnly $24.99
2-component buff surfacer designed for overall jobsOnly $89.99
2-component black surfacer designed for overall jobsOnly $89.49