• Home
  • Door Hinge Pin Puller
Door Hinge Pin Puller is rated 2.8 out of 5 by 21.
Rated 1 out of 5 by from not good at all The tool is shown removing a door pin from a vw beetle upside down. I tried using it to remove door pins on my beetle and it scratched the paint on the doors also bent every single pin it came with. This thing is junk I ended up getting it to work after I cut off some grade 8 bolts for push pins and took out the push bolt it came with and replaced it with an Allen head bolt so I could turn it without gouging the paint, also ended up bending the tool slightly,still ended up having to repair the damage done by this tool. If you are buying it to remove vw hinge pins you are better off buying the 180 dollar tool.
Date published: 2015-08-18
Rated 4 out of 5 by from Won't work on 48-50 Ford Trucks I was pleased with the price, prompt delivery, and quality of the Door Hinge Pin Puller. However, the size and shape of the tool's bolt is so large, that it can not be used on my 1949 Ford F-1 without damaging the sheet metal and finish of the door. So for my truck, it is worthless. It needs to have a choice of bolt heads to be more useful for a wide range of vehicles.
Date published: 2010-01-10
Rated 4 out of 5 by from Well made heavy duty Put this tool to use as soon as it arrived ... a real challenge, my hinge pins had never been replaced on my 49 F-1 project truck and were not about to budge. Three days of soaking and heating resulted in two pins successfully removed ... the other two were so tight that the push pins distorted as pressure was applied. I replaced them with true hardened pins and was then able to begin moving the hinge pins. Bottom line, this is a really good tool that needs to be upgraded with hardened push pins to get the tough jobs done right.
Date published: 2015-02-06
  • y_2017, m_8, d_18, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_en_US, sid_31139, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Will this work on a1995 GMC suburban barn door

Asked by: flip5851
The measurements of this tool are: The opening is 3 3/4" high and 1 1/2" deep. The diameter of the pin that pushes is 3/8" This should allow you to see if it works on your vehicle.
Answered by: S Church
Date published: 2016-05-10

will this work in a 99 dodge durango

Asked by: mando60
No, it will not work on a newer yeared vehicles door pin.
Answered by: SeanA
Date published: 2014-12-19

will this work on a 1967 VW beetle door? Has anyone tried it?

Asked by: JoeVW67
With the door off the car, this tool can be used on a VW Bug door. Please note that the picture is showing incorrect use of the tool on a VW Bug - the pin needs to be pushed out the top on a Bug. Another method that I use for removing VW hinge pins is with an Air Chisel and round chisel. http://www.eastwood.com/air-hammer-with-chisel-set.html
Answered by: NickC
Date published: 2014-09-29
  • y_2017, m_8, d_18, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_31139, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Door Hinge Pin Puller

Item #31139 Brand: Eastwood

Replace worn hinge pins to help
restore proper door alignment

In stock

Only $29.99
Hinge Pin Remover. Replace worn hinge pins to help restore proper door alignment. This heavy duty hinge pin remover/installer fits a wide range of antique and modern hinges up to 2 7/8" wide. Cast iron frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1 1/2", and 2") exerts enough pressure to remove most pins. Limited 1 year manufacturer's warranty. Removes hinge pins up to 7/16" (.437"). Tool Clearance over 1/2" (.530").

Details

Hinge Pin Remover. Replace worn hinge pins to help restore proper door alignment. This heavy duty hinge pin remover/installer fits a wide range of antique and modern hinges up to 2-7/8" wide.Cast iron frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1-1/2", and 2") exerts enough pressure to remove most pins. Designed only for Fords. Limited 1-year manufacturer's warranty. Removes hinge pins up to 7/16" (0.437"). Tool Clearance over 1/2" (0.530").

More info...

About Door Hinge Pin Puller

Hinge Pin Remover. Replace worn hinge pins to help restore proper door alignment. This heavy duty hinge pin remover/installer fits a wide range of antique and modern hinges up to 2 7/8" wide. Cast iron frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1 1/2", and 2") exerts enough pressure to remove most pins. Limited 1 year manufacturer's warranty. Removes hinge pins up to 7/16" (.437"). Tool Clearance over 1/2" (.530").


Contents

Cast iron frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1 1/2", and 2") and instructions.


Customer Reviews

Questions & Answers

Customers also viewed: