Door Hinge Pin Puller

$29.99
OR

Quick Overview

Replace worn hinge pins to help
restore proper door alignment

Door Hinge Pin Puller

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Door Hinge Pin Puller

Details

Hinge Pin Remover. Replace worn hinge pins to help restore proper door alignment. This heavy duty hinge pin remover/installer fits a wide range of antique and modern hinges up to 2-7/8" wide.Cast iron frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1-1/2", and 2") exerts enough pressure to remove most pins. Designed only for Fords. Limited 1-year manufacturer's warranty. Removes hinge pins up to 7/16" (0.437"). Tool Clearance over 1/2" (0.530").

Additional Information

Air Pressure No
Air Volume No
Media Capacity No
Application Position pin puller on lowest pin first. Remove bolt from puller frame and insert smallest pin into center hole of threaded bolt. Insert bolt and pin into Hinge Pin Puller frame 2 full turns. Use a 3/4" box end wrench or socket to tighten bolt until it bottoms against frame. Unscrew bolt and insert next larger pin until hinge pin is removed. To install push new pin in place and using shortest pin tighten bolt to seat. Repeat as necessary to fully seat hinge pin.
Size/Content Dropped forged frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1 1/2", and 2") and instructions.
Accessories No
FAQ's No
Safety Info No

You may also be interested in the following product(s)

Master Door Panel Tool Set 5pc Stainless

Master Door Panel Tool Set 5pc Stainless

$54.99
Panel Separating Knife

Panel Separating Knife

$24.99
   

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.