• Home
  • Eastwood Master Blaster-Dual Blaster

Eastwood Master Blaster-Dual Blaster

Item #11737 Brand: Eastwood

Switch "on the fly" between soda and abrasive media...or combine!
Heavy Item - Special shipping charges may apply.

Details

Eastwood "Master Blaster" Dual Blaster lets you switch "on-the-fly" between soda and abrasive media, or a combination of both! Eastwood's exclusive combination soda blaster and abrasive blaster features our patent-pending "Mixing Valve" that lets you switch instantly between full-flow soda media for gentle-to-mild cleaning or paint removal on stainless, chrome, aluminum or fiberglass, and full-flow aggressive abrasive media for removing even the heaviest rust from frames and suspension components. Also allows infinite "on-the-fly" mixing of the two medias for controlled removal of paint or rust/corrosion on virtually any surface. A must for the serious restorer!
  • Switch between medias in seconds, or mix at an infinite ratio between the two
  • On-the-fly switching or mixing saves you money and cuts blasting times in half
  • Includes extra nozzles and moisture separator
Click Here to see the winners of the Rename the Dual Blaster Contest!

About Eastwood Master Blaster-Dual Blaster

Use soda blast supplies to remove coatings on delicate substrates such as fiberglass, chrome or stainless...then easily switch on-the-fly to harsher abrasives such as crushed glass, glass bead or aluminum oxide to blast through heavy scale, rust or multiple coatings. It's a must-have tool for restoration and maintenance shops where rust and paint removal are issues on multiple surfaces such as fiberglass, steel, aluminum, etc. Each of the fully welded, powder-coated tanks holds 100 lbs. of abrasive media (75 lbs. of soda), and works on as little as 10 cfm at 90 psi. 10-ft.-long, heavy-wall blast hose. Imported.


Contents

Unit weighs 80 lbs., and includes extra nozzles and moisture filter.


FAQs

(Q) What size of compressor is required?
(A) Minimum 10-cfm, 90-psi compressor.

(Q) Which nozzles can I use with the Master Blaster?
(A) Use any of these nozzles: 51556 (2.0mm), 12111 (2.5mm), 12112 (3.0mm), or 51557 (5.0mm)
.


Safety

WARNING: Pressure blasters and blast cabinets emit abrasive particles under high pressure. Adequate respiratory, eye, and body protection must be utilized at all times during product operation. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases and must be avoided. Always wear NIOSH-approved respiratory protection when operating the equipment.


Warranty

1-year mfr's. warranty against defects.


Instructions

Click here for product instructions


Accessories & Consumables

Replacement Parts

51556 2.0mm nozzle (requires minimum 6-cfm 60-psi compressor)
11931 Blast Pipe
11917 Moisture Trap
11914 Outer and Inner Valve
11902 3-Way Manifold
11897 First Air Pipe
11900 Second Air Pipe
11896 Seal Ring

Accessories

Deluxe Blasting Hood
Ground Glass, 40-70 Grit
Glass Bead, 100-170 Grit
Glass Bead, 70-100
Aluminum Oxide 60 Grit
Aluminum Oxide 90 Grit
Automotive M Soda Media
Automotive XL Soda Media
Rust Removal XL Soda with Aluminum Oxide
After Blast, 1 Gallon


Customers also viewed: