- Eastwood Master Blaster-Dual Blaster
Eastwood Master Blaster-Dual Blaster
Item #11737 Brand: Eastwood
- Switch between medias in seconds, or mix at an infinite ratio between the two
- On-the-fly switching or mixing saves you money and cuts blasting times in half
- Includes extra nozzles and moisture separator
About Eastwood Master Blaster-Dual Blaster
Use soda blast supplies to remove coatings on delicate substrates such as fiberglass, chrome or stainless...then easily switch on-the-fly to harsher abrasives such as crushed glass, glass bead or aluminum oxide to blast through heavy scale, rust or multiple coatings. It's a must-have tool for restoration and maintenance shops where rust and paint removal are issues on multiple surfaces such as fiberglass, steel, aluminum, etc. Each of the fully welded, powder-coated tanks holds 100 lbs. of abrasive media (75 lbs. of soda), and works on as little as 10 cfm at 90 psi. 10-ft.-long, heavy-wall blast hose. Imported.
Unit weighs 80 lbs., and includes extra nozzles and moisture filter.
(Q) What size of compressor is required?
(A) Minimum 10-cfm, 90-psi compressor.
(Q) Which nozzles can I use with the Master Blaster?
(A) Use any of these nozzles: 51556 (2.0mm), 12111 (2.5mm), 12112 (3.0mm), or 51557 (5.0mm)
WARNING: Pressure blasters and blast cabinets emit abrasive particles under high pressure. Adequate respiratory, eye, and body protection must be utilized at all times during product operation. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases and must be avoided. Always wear NIOSH-approved respiratory protection when operating the equipment.
1-year mfr's. warranty against defects.
Accessories & Consumables
51556 2.0mm nozzle (requires minimum 6-cfm 60-psi compressor)
11917 Moisture Trap
11914 Outer and Inner Valve
11902 3-Way Manifold
11897 First Air Pipe
11900 Second Air Pipe
11861 Seal Ring
Deluxe Blasting Hood
Ground Glass, 40-70 Grit
Glass Bead, 100-170 Grit
Glass Bead, 70-100
Aluminum Oxide 60 Grit
Aluminum Oxide 90 Grit
Automotive M Soda Media
Automotive XL Soda Media
Rust Removal XL Soda with Aluminum Oxide
After Blast, 1 Gallon
Customers also viewed:
Cleans, degreases, etches blasted metal to improve paint adhesionOnly $39.99
Easiest way to neatly pour abrasive into a blaster; also filters debrisOnly $15.79
Removes debris from blast media when you want to reuse itOnly $15.79